The IESG has approved the following document: - 'Basic Requirements for IPv6 Customer Edge Routers' <draft-ietf-v6ops-ipv6-cpe-router-07.txt> as an Informational RFC This document is the product of the IPv6 Operations Working Group. The IESG contact persons are Ron Bonica and Dan Romascanu. A URL of this Internet Draft is: https://datatracker.ietf.org/doc/draft-ietf-v6ops-ipv6-cpe-router/ Technical Summary This document specifies requirements for an IPv6 Customer Edge (CE) router. It focuses on the basic provisioning of an IPv6 CE router and the provisioning of IPv6 hosts attached to it. Working Group Summary Most notable in the working group process was direct collaboration with the primary consumers of its recommendations - Broadband Forum, Cable Labs, broadband ISPs, and CPE vendors. Document Quality This document does not specify a protocol. It does specify a CPE router that might be useful in residential broadband networks and the non-security feature set they need. The security feature set is specified in a separate working group document, draft-ietf-v6ops-cpe-simple-security, which it reference on that topic. BBF and Cable Labs involvement has resulted in the recommendations being in keeping with the expectations of those prominent fora. Personnel Fred Baker is shepherd for this document. _______________________________________________ IETF-Announce mailing list IETF-Announce@ietf.org https://www.ietf.org/mailman/listinfo/ietf-announce
