A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Routing Over Low power and Lossy networks Working Group of the IETF.
Title : RPL: IPv6 Routing Protocol for Low power and Lossy Networks
Author(s) : T. Winter, et al.
Filename : draft-ietf-roll-rpl-09.txt
Pages : 103
Date : 2010-06-11
Low power and Lossy Networks (LLNs) are a class of network in which
both the routers and their interconnect are constrained: LLN routers
typically operate with constraints on (any subset of) processing
power, memory and energy (battery), and their interconnects are
characterized by (any subset of) high loss rates, low data rates and
instability. LLNs are comprised of anything from a few dozen and up
to thousands of routers, and support point-to-point traffic (between
devices inside the LLN), point-to-multipoint traffic (from a central
control point to a subset of devices inside the LLN) and multipoint-
to-point traffic (from devices inside the LLN towards a central
control point). This document specifies the IPv6 Routing Protocol
for LLNs (RPL), which provides a mechanism whereby multipoint-to-
point traffic from devices inside the LLN towards a central control
point, as well as point-to-multipoint traffic from the central
control point to the devices inside the LLN, is supported. Support
for point-to-point traffic is also available.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-roll-rpl-09.txt
Internet-Drafts are also available by anonymous FTP at:
ftp://ftp.ietf.org/internet-drafts/
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-roll-rpl-09.txt>
-
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www.ietf.org/mailman/listinfo/i-d-announce
Internet-Draft directories: http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
