The IESG has approved the following document: - 'Diameter Policy Processing Application ' <draft-brenner-dime-peem-01.txt> as an Informational RFC This document has been reviewed in the IETF but is not the product of an IETF Working Group. The IESG contact person is Dan Romascanu. A URL of this Internet-Draft is: http://www.ietf.org/internet-drafts/draft-brenner-dime-peem-01.txt Technical Summary This document describes the need for a new IANA Diameter Command Code to be used in a vendor-specific new application for invocation of Policy Processing (Policy Evaluation, or Evaluation and Enforcement). This application is needed as one of the implementations of the Open Mobile Aliance (OMA) Policy Evaluation, Enforcement and Management (PEEM) enabler, namely for the PEM-1 interface used to send a request/responses for Policy Processing. Working Group Summary This is an Area Director sponsored individual submission, which was written following a discussion in the IESG about the best way to support the allocation of the command code required by the OMA. Document Quality The original document that defines the new application was discussed and approved by the OMA. Personnel The sponsoring Area Director was Dan Romascanu. Hannes Tschofenig reviewed the document on behalf of the Diameter Extensions (DIME) WG. The document was also reviewed by IANA. RFC Editor Note Please make the following change: OLD: 5.1. Command Codes This specification assigns the value TBD-Cmd-code from the Command Code namespace defined in [RFC3588]. See Section 5.4.1.3.1 of [PEM-1-TS] for the assignment of the TBD-Cmd-code. 5.2. AVP Codes This specification assigns the value TBD-AVP-Code for the Policy-Data AVP, in the OMA Vendor-ID (PEN) AVP namespace. See Section 5.4.1.3.3 of [PEM-1-TS] for the assignment of the namespace in this specification. 5.3. Application Identifier This specification uses the value 16777243 in the Application Identifier namespace as registered in IANA for the Policy Processing Application. See Section 5.4.1.3 of [PEM-1-TS] for more information. NEW: 5.1. Command Codes This specification assigns the value TBD-Cmd-code from the Command Code namespace defined in [RFC3588]. See Section 5.4.1.3.1 of [PEM-1-TS] for the assignment of the TBD-Cmd-code. Upon approval of this document, the IANA will make the following assignments in the "Authentication, Authorization, and Accounting (AAA) Parameters" registry located at http://www.iana.org/assignments/aaa-parameters sub-registry "Command Codes" Code Value Name Reference -------------- ------------------------------- --------- [TBD-Cmd-code] PDR / PDA [RFC-brenner-dime-peem-01] 5.2. AVP Codes This specification uses the value 1 for the Policy-Data AVP, in the OMA Vendor-ID (PEN) AVP namespace. See Section 5.4.1.3.3 of [PEM-1-TS] for the assignment of the namespace in this specification. No IANA Action is required. 5.3. Application Identifier This specification uses the value 16777243 in the Application Identifier namespace as registered in IANA for the Policy Processing Application. See Section 5.4.1.3 of [PEM-1-TS] for more information. No IANA action is required. _______________________________________________ IETF-Announce@ietf.org https://www.ietf.org/mailman/listinfo/ietf-announce
