A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : SNMP Traffic Measurements and Trace Exchange Formats
Author(s) : J. Schoenwaelder
Filename : draft-irtf-nmrg-snmp-measure-02.txt
Pages : 28
Date : 2007-12-07
The Simple Network Management Protocol (SNMP) is widely deployed to
monitor, control and (sometimes also) configure network elements.
Even though the SNMP technology is well documented, it remains
relatively unclear how SNMP is used in practice and what typical SNMP
usage patterns are.
This document proposes to carry out large scale SNMP traffic
measurements in order to develop a better understanding how SNMP is
used in real world production networks. It describes the motivation,
the measurement approach, and the tools and data formats needed to
carry out such a study.
This document was produced within the IRTF's Network Management
Research Group (NMRG) and represents the consensus of all of the
active contributors to this group.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-irtf-nmrg-snmp-measure-02.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-irtf-nmrg-snmp-measure-02.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-irtf-nmrg-snmp-measure-02.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-irtf-nmrg-snmp-measure-02.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
