A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Benchmarking Methodology Working Group of the IETF.
Title : Terminology for Benchmarking IPsec Devices
Author(s) : M. Bustos, et al.
Filename : draft-ietf-bmwg-ipsec-term-09.txt
Pages : 48
Date : 2007-7-11
This purpose of this document is to define terminology specific to
measuring the performance of IPsec devices. It builds upon the
tenets set forth in [RFC1242], [RFC2544], [RFC2285] and other IETF
Benchmarking Methodology Working Group (BMWG) documents used for
benchmarking routers and switches. This document seeks to extend
these efforts specific to the IPsec paradigm. The BMWG produces two
major classes of documents: Benchmarking Terminology documents and
Benchmarking Methodology documents. The Terminology documents
present the benchmarks and other related terms. The Methodology
documents define the procedures required to collect the benchmarks
cited in the corresponding Terminology documents.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-bmwg-ipsec-term-09.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-bmwg-ipsec-term-09.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-bmwg-ipsec-term-09.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-bmwg-ipsec-term-09.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
