I-D ACTION:draft-muley-dutta-pwe3-redundancy-bit-01.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A New Internet-Draft is available from the on-line Internet-Drafts 
directories.


	Title		: Preferential Forwarding Status bit definition
	Author(s)	: P. Muley, et al.
	Filename	: draft-muley-dutta-pwe3-redundancy-bit-01.txt
	Pages		: 14
	Date		: 2007-7-8
	
This document describes a mechanism for standby status signaling of 
   redundant PWs between their termination points. A set of redundant 
   PWs is configured between PE nodes in SS-PW applications, or between 
   T-PE nodes in MS-PW applications. In order for the PE/T-PE nodes to 
   indicate the preferred PW path to forward to one another, a new 
   status bit is needed to indicate a preferential forwarding status of 
   active or standby for each PW in the redundancy set. This draft 
   specifies a new PW status bit for this purpose.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-muley-dutta-pwe3-redundancy-bit-01.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of 
the message. 
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.

Internet-Drafts are also available by anonymous FTP. Login with the 
username "anonymous" and a password of your e-mail address. After 
logging in, type "cd internet-drafts" and then 
"get draft-muley-dutta-pwe3-redundancy-bit-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt

Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-muley-dutta-pwe3-redundancy-bit-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.

Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-muley-dutta-pwe3-redundancy-bit-01.txt>
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce

[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux