A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Transport Area Working Group Working Group of the IETF.
Title : Stream Control Transmission Protocol (SCTP) Dynamic Address Reconfiguration
Author(s) : R. Stewart, et al.
Filename : draft-ietf-tsvwg-addip-sctp-22.txt
Pages : 41
Date : 2007-6-19
A local host may have multiple points of attachment to the Internet,
giving it a degree of fault tolerance from hardware failures. Stream
Control Transmission Protocol (SCTP) [I-D.ietf-tsvwg-2960bis] was
developed to take full advantage of such a multi-homed host to
provide a fast failover and association survivability in the face of
such hardware failures. This document describes an extension to SCTP
that will allow an SCTP stack to dynamically add an IP Addresses to
an SCTP association, dynamically delete an IP addresses from an SCTP
association, and to request to set the primary address the peer will
use when sending to an endpoint.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-tsvwg-addip-sctp-22.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-tsvwg-addip-sctp-22.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-tsvwg-addip-sctp-22.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-tsvwg-addip-sctp-22.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
