A new Request for Comments is now available in online RFC libraries. RFC 4798 Title: Connecting IPv6 Islands over IPv4 MPLS Using IPv6 Provider Edge Routers (6PE) Author: J. De Clercq, D. Ooms, S. Prevost, F. Le Faucheur Status: Standards Track Date: February 2007 Mailbox: jeremy.de_clercq@alcatel-lucent.be, dirk@onesparrow.com, stuart.prevost@bt.com, flefauch@cisco.com Pages: 14 Characters: 31381 Updates/Obsoletes/SeeAlso: None I-D Tag: draft-ooms-v6ops-bgp-tunnel-07.txt URL: http://www.rfc-editor.org/rfc/rfc4798.txt This document explains how to interconnect IPv6 islands over a Multiprotocol Label Switching (MPLS)-enabled IPv4 cloud. This approach relies on IPv6 Provider Edge routers (6PE), which are Dual Stack in order to connect to IPv6 islands and to the MPLS core, which is only required to run IPv4 MPLS. The 6PE routers exchange the IPv6 reachability information transparently over the core using the Multiprotocol Border Gateway Protocol (MP-BGP) over IPv4. In doing so, the BGP Next Hop field is used to convey the IPv4 address of the 6PE router so that dynamically established IPv4-signaled MPLS Label Switched Paths (LSPs) can be used without explicit tunnel configuration. [STANDARDS TRACK] This document is a product of the Inter-Domain Routing Working Group of the IETF. This is now a Proposed Standard Protocol. STANDARDS TRACK: This document specifies an Internet standards track protocol for the Internet community,and requests discussion and suggestions for improvements.Please refer to the current edition of the Internet Official Protocol Standards (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited. This announcement is sent to the IETF list and the RFC-DIST list. Requests to be added to or deleted from the IETF distribution list should be sent to IETF-REQUEST@IETF.ORG. Requests to be added to or deleted from the RFC-DIST distribution list should be sent to RFC-DIST-REQUEST@RFC-EDITOR.ORG. Details on obtaining RFCs via FTP or EMAIL may be obtained by sending an EMAIL message to rfc-info@RFC-EDITOR.ORG with the message body help: ways_to_get_rfcs. For example: To: rfc-info@RFC-EDITOR.ORG Subject: getting rfcs help: ways_to_get_rfcs Requests for special distribution should be addressed to either the author of the RFC in question, or to RFC-Manager@RFC-EDITOR.ORG. Unless specifically noted otherwise on the RFC itself, all RFCs are for unlimited distribution. Submissions for Requests for Comments should be sent to RFC-EDITOR@RFC-EDITOR.ORG. Please consult RFC 2223, Instructions to RFC Authors, for further information. The RFC Editor Team USC/Information Sciences Institute ... _______________________________________________ IETF-Announce@ietf.org https://www1.ietf.org/mailman/listinfo/ietf-announce