A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Routing extensions for discovery of
Multiprotocol (MPLS) Label Switch Router
(LSR) Traffic Engineering (TE) mesh membership
Author(s) : J. Vasseur, et al.
Filename : draft-ietf-ccamp-automesh-04.txt
Pages : 16
Date : 2007-1-24
The set up of a full mesh of Multi-Protocol Label Switching (MPLS)
Traffic Engineering (TE) Label Switched Paths (LSP) among a set of
Label Switch Routers (LSR) is a common deployment scenario of MPLS
Traffic Engineering either for bandwidth optimization, bandwidth
guarantees or fast rerouting with MPLS Fast Reroute. Such deployment
may require the configuration of potentially a large number of TE
LSPs (on the order of the square of the number LSRs). This document
specifies Interior Gateway Protocol (IGP) routing extensions for
Intermediate System-to-Intermediate System (IS-IS) and Open Shortest
Path First (OSPF) so as to provide an automatic discovery of the set
of LSRs members of a mesh in order to automate the creation of such
mesh of TE LSPs.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-automesh-04.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-ccamp-automesh-04.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ccamp-automesh-04.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ccamp-automesh-04.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
