A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the IP Performance Metrics Working Group of the IETF.
Title : A Two-way Active Measurement Protocol (TWAMP)
Author(s) : J. Babiarz, et al.
Filename : draft-ietf-ippm-twamp-02.txt
Pages : 18
Date : 2006-11-30
The IPPM One-way Active Measurement Protocol [RFC4656] (OWAMP)
provides a common protocol for measuring one-way metrics between
network devices. OWAMP can be used bi-directionally to measure
one-way metrics in both directions between two network elements.
However, it does not accommodate round-trip or two-way
measurements. This memo specifies a Two-way Active Measurement
Protocol (TWAMP), based on the OWAMP, that adds two-way or
round-trip measurement capabilities. The TWAMP measurement
architecture is usually comprised of two hosts with specific roles,
and this allows for some protocol simplifications, making it an
attractive alternative in some circumstances.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ippm-twamp-02.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-ippm-twamp-02.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ippm-twamp-02.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ippm-twamp-02.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
