A New Internet-Draft is available from the on-line Internet-Drafts
directories.
Title : Problem and Applicability Statements for the
use of Generalized Multi-Protocol Label
Switching (GMPLS) to Support Multiplex
Section Shared Protection Ring (MS-SPRing)
Author(s) : J. Gao, et al.
Filename : draft-gao-ccamp-gmpls-msspring-01.txt
Pages : 28
Date : 2006-11-16
In order to provide high availability for transport networks, link
protection technologies are adopted in the data plane. In present
Synchronous Digital Hierarchy (SDH) and Synchronous Optical Network
(SONET) optical transport networks, one of these protection
technologies, shared ring protection technologies, such as the 2/4-
Fiber Bi-directional Multiplex Section Shared Protection Ring(MS-
SPRing), are widely used. The same technologies can also be applied
in Optical Transport Networks (OTNs). This document describes a set
of issues to be addressed when applying GMPLS) to support MS-SPRings,
and sets out how GMPLS can be applied.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-gao-ccamp-gmpls-msspring-01.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-gao-ccamp-gmpls-msspring-01.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-gao-ccamp-gmpls-msspring-01.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-gao-ccamp-gmpls-msspring-01.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
