A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Layer 1 Virtual Private Networks Working Group of the IETF.
Title : Applicability Statement for Layer 1 Virtual Private Networks (L1VPNs) Basic Mode
Author(s) : T. Takeda
Filename : draft-ietf-l1vpn-applicability-basic-mode-00.txt
Pages : 17
Date : 2006-11-15
This document provides an applicability statement on the use of
Generalized Multiprotocol Label Switching (GMPLS) protocols and
mechanisms to support Basic Mode Layer 1 Virtual Private Networks
(L1VPNs).
L1VPNs provide customer services and connectivity at layer 1 over
layer 1 networks. The operation of L1VPNs is divided into the Basic
Mode and the Enhanced Mode where the Basic Mode of operation does not
feature any exchange of routing information between the layer 1
network and the customer domain. This document examines how GMPLS
protocols can be used to satisfy the requirements of a Basic Mode
L1VPN.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-l1vpn-applicability-basic-mode-00.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-l1vpn-applicability-basic-mode-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-l1vpn-applicability-basic-mode-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-l1vpn-applicability-basic-mode-00.txt>
-
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
