A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Use of Addresses in Generalized Multi-Protocol Label Switching (GMPLS) Networks
Author(s) : K. Shiomoto, et al.
Filename : draft-ietf-ccamp-gmpls-addressing-05.txt
Pages : 25
Date : 2006-10-25
This document explains and clarifies the use of addresses in
Generalized Multi-Protocol Label Switching (GMPLS) networks. The aim
of this document is to facilitate and ensure better interworking of
GMPLS-capable Label Switching Routers (LSRs) based on experience
gained in deployments and interoperability testing and proper
interpretation of published RFCs.
The document specifies a proper approach for the interpretation and
choice of address and identifier fields within GMPLS protocols and
references specific control plane usage models. It also examines
some common GMPLS Resource Reservation Protocol-Traffic Engineering
(RSVP-TE) signaling message processing issues and recommends
solutions. Finally, it discusses how to handle IPv6 sources and
destinations in the MPLS and GMPLS TE (Traffic Engineering) MIB
(Management Information Base) modules.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-addressing-05.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-ietf-ccamp-gmpls-addressing-05.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ccamp-gmpls-addressing-05.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-addressing-05.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
