A New Internet-Draft is available from the on-line Internet-Drafts
directories.
Title : Methodology for Benchmarking SIP Networking Devices
Author(s) : S. Poretsky, et al.
Filename : draft-poretsky-bmwg-sip-bench-meth-00.txt
Pages : 16
Date : 2006-10-17
This document describes the methodology for benchmarking Session
Initiation Protocol (SIP) performance as described in Terminology
document [Po06]. The methodology and terminology are to be used
for benchmarking SIP control plane performance with varying control
and media load. Both scale and establishment rate are measured by
control plane performance. The SIP Devices to be benchmarked may
be a single device under test (DUT) or a system under test (SUT).
Benchmarks can be obtained and compared for different types of
devices such as SIP Proxy Server, SBC, P-CSCF, and Server paired
with a Firewall/NAT device.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-poretsky-bmwg-sip-bench-meth-00.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of
the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the
username "anonymous" and a password of your e-mail address. After
logging in, type "cd internet-drafts" and then
"get draft-poretsky-bmwg-sip-bench-meth-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-poretsky-bmwg-sip-bench-meth-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-poretsky-bmwg-sip-bench-meth-00.txt>
-
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
