I-D ACTION:draft-ietf-mpls-p2mp-oam-reqs-01.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF.

	Title		: OAM Requirements for Point-to-Multipoint MPLS 
                          Networks
	Author(s)	: A. Farrel, et al.
	Filename	: draft-ietf-mpls-p2mp-oam-reqs-01.txt
	Pages		: 12
	Date		: 2006-2-28
	
Multi-Protocol Label Switching (MPLS) has been extended to encompass
   point-to-multipoint (P2MP) Label Switched Paths (LSPs). As with
   point-to-point MPLS LSPs the requirement to detect, handle and
   diagnose control and data plane defects is critical.

   For operators deploying services based on P2MP MPLS LSPs the
   detection and specification of how to handle those defects is
   important because such defects may not only affect the fundamentals
   of an MPLS network, but also because they may impact service level
   specification commitments for customers of their network.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mpls-p2mp-oam-reqs-01.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-mpls-p2mp-oam-reqs-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-mpls-p2mp-oam-reqs-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-ietf-mpls-p2mp-oam-reqs-01.txt>
_______________________________________________

I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce

[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux