A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : The Architecture of an RBridge Solution to TRILL
Author(s) : E. Gray
Filename : draft-gray-trill-rbridge-arch-00.txt
Pages : 34
Date : 2006-2-24
RBridges are link layer (L2) devices that use routing protocols
as a control plane. They combine the link layer ability to allow
hosts to reattach without renumbering with network layer routing
benefits. RBridges use existing link state routing to provide
higher RBridge to RBridge cross-section bandwidth, fast
convergence on reconfiguration, and more robust under link
interruption than an equivalent set of conventional bridges
using existing spanning tree forwarding. They are intended to
apply to similar L2 network sizes as conventional bridges and
are intended to be backward compatible with those bridges as
both ingress/egress and transit. They also attempt to retain as
much 'plug and play' as is already available in existing
bridges. This document proposes an RBridge system as a solution
to the TRILL problem. It also defines the RBridge architecture,
defines its terminology, and describes basic components and
desired behavior. One or more separate documents specify the
protocols and mechanisms that satisfy the architecture presented
herein.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-gray-trill-rbridge-arch-00.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-gray-trill-rbridge-arch-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-gray-trill-rbridge-arch-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-gray-trill-rbridge-arch-00.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
