A new Request for Comments is now available in online RFC libraries.
RFC 4165
Title: Signaling System 7 (SS7) Message Transfer Part 2
(MTP2) - User Peer-to-Peer Adaptation Layer (M2PA)
Author(s): T. George, B. Bidulock, R. Dantu, H. Schwarzbauer,
K. Morneault
Status: Standards Track
Date: September 2005
Mailbox: tgeorge_tx@verizon.net, bidulock@openss7.org,
rdantu@unt.edu,
HannsJuergen.Schwarzbauer@Siemens.com,
kmorneau@cisco.com
Pages: 53
Characters: 114669
Updates/Obsoletes/SeeAlso: None
I-D Tag: draft-ietf-sigtran-m2pa-13.txt
URL: ftp://ftp.rfc-editor.org/in-notes/rfc4165.txt
This document defines a protocol supporting the transport of
Signaling System Number 7 (SS7) Message Transfer Part (MTP) Level 3
signaling messages over Internet Protocol (IP) using the services of
the Stream Control Transmission Protocol (SCTP). This protocol would
be used between SS7 Signaling Points using the MTP Level 3
protocol. The SS7 Signaling Points may also use standard SS7 links
using the SS7 MTP Level 2 to provide transport of MTP Level 3
signaling messages. The protocol operates in a manner similar to MTP
Level 2 so as to provide peer-to-peer communication between SS7
endpoints.
This document is a product of the Signaling Transport Working Group of
the IETF.
This is now a Proposed Standard Protocol.
This document specifies an Internet standards track protocol for
the Internet community, and requests discussion and suggestions
for improvements. Please refer to the current edition of the
"Internet Official Protocol Standards" (STD 1) for the
standardization state and status of this protocol. Distribution
of this memo is unlimited.
This announcement is sent to the IETF list and the RFC-DIST list.
Requests to be added to or deleted from the IETF distribution list
should be sent to IETF-REQUEST@IETF.ORG. Requests to be
added to or deleted from the RFC-DIST distribution list should
be sent to RFC-DIST-REQUEST@RFC-EDITOR.ORG.
Details on obtaining RFCs via FTP or EMAIL may be obtained by sending
an EMAIL message to rfc-info@RFC-EDITOR.ORG with the message body
help: ways_to_get_rfcs. For example:
To: rfc-info@RFC-EDITOR.ORG
Subject: getting rfcs
help: ways_to_get_rfcs
Requests for special distribution should be addressed to either the
author of the RFC in question, or to RFC-Manager@RFC-EDITOR.ORG. Unless
specifically noted otherwise on the RFC itself, all RFCs are for
unlimited distribution.
Submissions for Requests for Comments should be sent to
RFC-EDITOR@RFC-EDITOR.ORG. Please consult RFC 2223, Instructions to RFC
Authors, for further information.
Joyce K. Reynolds and Sandy Ginoza
USC/Information Sciences Institute
...
Below is the data which will enable a MIME compliant Mail Reader
implementation to automatically retrieve the ASCII version
of the RFCs.
- <ftp://ftp.isi.edu/in-notes/rfc4165.txt>
-
_______________________________________________
IETF-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/ietf-announce
