A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Protocol Extensions for Header Compression over MPLS
Author(s) : J. Ash, et al.
Filename : draft-ash-avt-hc-over-mpls-protocol-01.txt
Pages : 17
Date : 2005-7-8
VoIP typically uses the encapsulation voice/RTP/UDP/IP. When MPLS
Labels are added, this becomes voice/RTP/UDP/IP/MPLS-labels. For an
MPLS VPN, the packet header is typically 48 bytes, while the voice
payload is often no more than 30 bytes, for example. Header
compression can significantly reduce the overhead through various
compression mechanisms. MPLS is used to route header-compressed (HC)
packets over an MPLS LSP without compression/decompression cycles at
each router. Such an HC over MPLS capability increases the bandwidth
efficiency as well as processing scalability of the maximum number of
simultaneous compressed flows that use HC at each router. MPLS
pseudowires are used to transport the HC context and other control
messages between the ingress and egress MPLS label switched router
(LSR), and the pseudowires define a point to point instance of each
HC session at the header decompressor. Standard HC methods (e.g.,
ECRTP, ROHC, etc.) are re-used to determine the context.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ash-avt-hc-over-mpls-protocol-01.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ash-avt-hc-over-mpls-protocol-01.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ash-avt-hc-over-mpls-protocol-01.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ash-avt-hc-over-mpls-protocol-01.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
