A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the IP over Cable Data Network Working Group of the IETF.
Title : Cable Device Management Information Base for
Data-Over-Cable Service Interface
Specification Compliant Cable Modems and Cable
Modem Termination Systems
Author(s) : R. Woundy, K. Marez
Filename : draft-ietf-ipcdn-device-mibv2-09.txt
Pages : 91
Date : 2005-6-21
This memo is a revision of the standards track RFC 2669. Please see
"Revision Descriptions" below for a description of changes. This
document obsoletes RFC 2669.
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it defines a basic set of managed objects for SNMP-
based management of DOCSIS-compliant Cable Modems and Cable Modem
Termination Systems.
This memo is a product of the IPCDN working group within the Internet
Engineering Task Force. Comments are solicited and should be
addressed to the working group's mailing list at ipcdn@ietf.org
and/or the author.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ipcdn-device-mibv2-09.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-ipcdn-device-mibv2-09.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ipcdn-device-mibv2-09.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ipcdn-device-mibv2-09.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
