A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the IP Version 6 Working Group Working Group of the IETF.
Title : IP Version 6 over PPP
Author(s) : S. Varada, et al.
Filename : draft-ietf-ipv6-over-ppp-v2-02.txt
Pages : 15
Date : 2005-6-15
The Point-to-Point Protocol (PPP) provides a standard method of
encapsulating Network Layer protocol information over
point-to-point links. PPP also defines an extensible Link Control
Protocol, and proposes a family of Network Control Protocols
(NCPs) for establishing and configuring different network-layer
protocols.
This document defines the method for sending IPv6 packets over PPP
links, the NCP for establishing and configuring the IPv6 over PPP
and the method for forming IPv6 link-local addresses on PPP links.
It also specifies the conditions for performing Duplicate Address
Detection on IPv6 global unicast addresses configured for PPP
links either through stateful or stateless address
autoconfiguration.
This document is an update to RFC 2472 and, hence, obsoletes it.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ipv6-over-ppp-v2-02.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-ipv6-over-ppp-v2-02.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ipv6-over-ppp-v2-02.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ipv6-over-ppp-v2-02.txt>
-
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
