I-D ACTION:draft-krishna-slrrp-02.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A New Internet-Draft is available from the on-line Internet-Drafts directories.


	Title		: Simple Lightweight RFID Reader Protocol
	Author(s)	: P. Krishna, D. Husak
	Filename	: draft-krishna-slrrp-02.txt
	Pages		: 58
	Date		: 2005-6-7
	
Radio Frequency Identification (RFID) is a technique whereby a device,
known as an RFID 'reader', can remotely sense the presence of, and
access embedded memory on, a transponder known as a 'tag'. Tags may be
affixed to objects as a means of tracking the location and movement of
said objects within facilities equipped with RFID readers.  Typically,
readers communicate with upstream devices, in this document referred to
as 'controllers', to receive control commands and upload read tag
information.

This draft specifies the Simple Lightweight RFID Reader Protocol, or
SLRRP (pronounced 'slurp'), to be used to convey configuration, control,
status, and tag information between controllers and readers in an IP-
based network.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-krishna-slrrp-02.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-krishna-slrrp-02.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-krishna-slrrp-02.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-krishna-slrrp-02.txt>
_______________________________________________

I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce

[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux