A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Mobile IPv4 Host Configuration Vendor Specific Extensions
Author(s) : K. Leung, et al.
Filename : draft-leung-mip4-host-config-vse-00.txt
Pages : 15
Date : 2005-2-11
An IP device requires basic host configuration to be able to
communicate. For example, the IP address on the interface and the
DNS server for a hostname to IP address lookup. This information is
configured statically or obtained dynamically using Dynamic Host
Configuration Protocol (DHCP) or Point-to- Point Protocol/IP Control
Protocol (PPP/IPCP). However, both DHCP and PPP/IPCP provides host
configuration based on the access network. In Mobile IPv4, the
registration process boots up a Mobile Node at an access network,
also known as foreign network. The information to configure the host
needs to be based on the home network. This document describes the
extensions used to provide the base host configuration in the
Registration Request and Reply messages.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-leung-mip4-host-config-vse-00.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-leung-mip4-host-config-vse-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-leung-mip4-host-config-vse-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-leung-mip4-host-config-vse-00.txt>
-
_______________________________________________
I-D-Announce mailing list
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
