A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Generalized MPLS (GMPLS) RSVP-TE Signaling in support
of Layer-2 Label Switched Paths (L2 LSP)
Author(s) : D. Papadimitriou, et al.
Filename : draft-papadimitriou-ccamp-gmpls-l2sc-lsp-03.txt
Pages : 17
Date : 2004-10-27
Most efforts on Generalized MPLS (GMPLS) have been focused on
environments covering Circuit oriented LSPs (Sonet/SDH, OTH, etc.).
There is minimal documentation on GMPLS support of Layer-2 Label
Switched Paths (L2 LSPs), e.g. native Ethernet LSPs, Asynchronous
Transfer Mode (ATM) LSPs and Frame Relay (FR) LSPs.
This document details GMPLS capabilities for supporting L2 LSPs in
several network environments including overlays. As such, it
provides a reference detailing the applicability of GMPLS for Layer-
2 switching environments in support of various deployment scenarios,
including the integrated (e.g. multi LSP-region networks), the
augmented/peer and the overlay model (e.g. Generalized VPN (GVPN)
and user-network interfaces (GMPLS UNI)).
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-papadimitriou-ccamp-gmpls-l2sc-lsp-03.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-papadimitriou-ccamp-gmpls-l2sc-lsp-03.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-papadimitriou-ccamp-gmpls-l2sc-lsp-03.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-papadimitriou-ccamp-gmpls-l2sc-lsp-03.txt>
-
_______________________________________________
I-D-Announce@ietf.org
https://www1.ietf.org/mailman/listinfo/i-d-announce
