I-D ACTION:draft-ietf-mboned-mroutesec-01.txt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the MBONE Deployment Working Group of the IETF.

	Title		: PIM-SM Multicast Routing Security Issues and Enhancements
	Author(s)	: P. Savola, et al.
	Filename	: draft-ietf-mboned-mroutesec-01.txt
	Pages		: 20
	Date		: 2004-5-19
	
   This memo describes security threats for the larger (intra-domain, or
   inter-domain) multicast routing infrastructures. Only Protocol
   Independent Multicast - Sparse Mode (PIM-SM) is analyzed, in its
   three main operational modes: the traditional Any Source Multicast
   (ASM) model, Source-Specific Multicast (SSM) model, and the ASM model
   enhanced by the Embedded-RP group-to-RP mapping mechanism.  This memo
   also describes enhancements to the protocol operations to mitigate
   the identified threats.

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mboned-mroutesec-01.txt

To remove yourself from the I-D Announcement list, send a message to 
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.  
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce 
to change your subscription settings.


Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-mboned-mroutesec-01.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@ietf.org.
In the body type:
	"FILE /internet-drafts/draft-ietf-mboned-mroutesec-01.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
<ftp://ftp.ietf.org/internet-drafts/draft-ietf-mboned-mroutesec-01.txt>

[Index of Archives]     [IETF]     [IETF Discussion]     [Linux Kernel]

  Powered by Linux