A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Multiprotocol Label Switching Working Group of the IETF.
Title : Maximum Transmission Unit Signalling Extensions for the Label Distribution Protocol
Author(s) : B. Black, K. Kompella
Filename : draft-ietf-mpls-ldp-mtu-extensions-03.txt
Pages : 10
Date : 2004-4-9
Proper functioning of RFC 1191 path Maximum Transmission Unit (MTU)
discovery requires that IP routers have knowledge of the MTU for each
link to which they are connected. As currently specified, the Label
Distribution Protocol (LDP) does not have the ability to signal the
MTU for a Label Switched Path (LSP) to the ingress Label Switching
Router (LSR). In the absence of this functionality, the MTU for each
LSP must be statically configured by network operators or by
equivalent, off-line mechanisms.
This document specifies experimental extensions to LDP in support of
LSP MTU discovery.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-mpls-ldp-mtu-extensions-03.txt
To remove yourself from the I-D Announcement list, send a message to
i-d-announce-request@ietf.org with the word unsubscribe in the body of the message.
You can also visit https://www1.ietf.org/mailman/listinfo/I-D-announce
to change your subscription settings.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-mpls-ldp-mtu-extensions-03.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-mpls-ldp-mtu-extensions-03.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-mpls-ldp-mtu-extensions-03.txt>
-
