A New Internet-Draft is available from the on-line Internet-Drafts directories.
Title : Signaling Tunnel Encapsulation/Deencapsulation Capabilities
Author(s) : R. Aggarwal
Filename : draft-raggarwa-ppvpn-tunnel-encap-sig-03.txt
Pages : 8
Date : 2004-2-11
This document proposes a mechanism for signaling a PE router's tunnel
encapsulation capabilities. One example is its capability to
encapsulate MPLS using dynamic GRE and/or IP. This is applicable when
a MPLS packet is tunneled using dynamic GRE and/or IP encapsulation
[MPLS-IP-GRE] between PE routers. For instance the
MPLS packet may be a 2547 based MPLS VPN packet [2547bis], a layer 2
packet transported using MPLS [MARTINI], a MPLS tunneled IPv6 packet
or a MPLS IPv6 VPN packet [BGP-VPN-IPv6]. Adding such a mechanism has
several benefits. It helps in blackhole avoidance and eases
transitioning from MPLS tunneling based Layer 3/Layer 2 VPNs to GRE/IP
tunneling based Layer 3/Layer 2 VPNs (and vice versa). Such a mechanism
is needed where a network may be using MPLS and GRE (or IP) for
tunneling, simultaneously in different parts of the network. It can
help in encapsulation selection when multiple tunneling technologies
are supported.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-raggarwa-ppvpn-tunnel-encap-sig-03.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-raggarwa-ppvpn-tunnel-encap-sig-03.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-raggarwa-ppvpn-tunnel-encap-sig-03.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-raggarwa-ppvpn-tunnel-encap-sig-03.txt>
-
