A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Inter-Domain Routing Working Group of the IETF.
Title : A Border Gateway Protocol 4 (BGP-4)
Author(s) : Y. Rekhter, et. al.
Filename : draft-ietf-idr-bgp4-22.txt
Pages : 98
Date : 2003-10-22
The Border Gateway Protocol (BGP) is an inter-Autonomous System routing protocol.
The primary function of a BGP speaking system is to exchange network
reachability information with other BGP systems. This network
reachability information includes information on the list of
Autonomous Systems (ASs) that reachability information traverses.
This information is sufficient to construct a graph of AS
connectivity for this reachability from which routing loops may be
pruned and some policy decisions at the AS level may be enforced.
BGP-4 provides a set of mechanisms for supporting Classless Inter-
Domain Routing (CIDR) [RFC1518, RFC1519]. These mechanisms include
support for advertising a set of destinations as an IP prefix, and
eliminating the concept of network 'class' within BGP. BGP-4 also
introduces mechanisms which allow aggregation of routes, including
aggregation of AS paths.
Routing information exchanged via BGP supports only the destination-
based forwarding paradigm, which assumes that a router forwards a
packet based solely on the destination address carried in the IP
header of the packet. This, in turn, reflects the set of policy
decisions that can (and can not) be enforced using BGP. BGP can
support only the policies conforming to the destination-based
forwarding paradigm.
This specification covers only the exchange of IP version 4 network
reachability information.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-idr-bgp4-22.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-idr-bgp4-22.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-idr-bgp4-22.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-idr-bgp4-22.txt>
-
