The IESG has approved the Internet-Draft 'Definitions of Supplemental Managed
Objects for ATM Interface' <draft-ietf-atommib-atm2-19.txt> as a Proposed
Standard. This document is the product of the AToM MIB Working Group.
The IESG contact persons are Thomas Narten and Erik Nordmark.
Technical Summary
This memo defines objects used for managing ATM-based interfaces, devices,
and services in addition to those defined in the ATM-MIB [24], to
provide additional support for the management of:
- ATM Switched Virtual Connections (SVCs)
- ATM Permanent Virtual Connections (PVCs)
Working Group Summary
There was consensus in the WG to advance this document.
Protocol Quality
This document has reviewed for the IESG by Erik Nordmark, Bert Wijnen,
and John Flick.
RFC-editor notes:
- Page 73/74, pls change
OLD:
atmIlmiSrvcRegEntry OBJECT-TYPE
SYNTAX AtmIlmiSrvcRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single service provider that is available to
the user-side of an adjacent device through the ILMI."
INDEX { atmIlmiSrvcRegIndex,
atmIlmiSrvcRegServiceID,
atmIlmiSrvcRegAddressIndex }
NEW:
atmIlmiSrvcRegEntry OBJECT-TYPE
SYNTAX AtmIlmiSrvcRegEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Information about a single service provider that is available
to the user-side of an adjacent device through the ILMI.
Implementors need to be aware that if the size of
atmIlmiSrvcRegServiceID exceeds 113 sub-identifiers then OIDs
of column instances in this table will have more than 128 sub-
identifiers and cannot be accessed using SNMPv1, SNMPv2c, or
SNMPv3."
INDEX { atmIlmiSrvcRegIndex,
atmIlmiSrvcRegServiceID,
atmIlmiSrvcRegAddressIndex }
-Pls remove obsolete and non-needed (there are no citations) references:
Remove from the Normative References:
[RFC1905], [RFC1906], [RFC2571], [RFC2572], [RFC2573], [RFC2574],
[RFC2575]
Remove from the Informative References:
[RFC1157], [RFC2570], [RFC1155], RFC1212], [RFC1215], [RFC1901]
