The IESG has approved changing the status of the following document: - Internet Printing Protocol/1.1: Model and Semantics (rfc8011) to Internet Standard This protocol action is documented at: https://datatracker.ietf.org/doc/status-change-change-ipp-to-internet-standard/ A URL of the affected document is: https://datatracker.ietf.org/doc/rfc8011/ Status Change Details: As specified in RFC 6410: (1) There are at least two independent interoperating implementations with widespread deployment and successful operational experience. - Over 98% of all digital network printers shipped in the last decade support IPP/1.1 (originally defined in RFC 2910/2911, September 2000). (2) There are no errata against the specification that would cause a new implementation to fail to interoperate with deployed ones. - There are currently no errata against RFC 8010/8011. (3) There are no unused features in the specification that greatly increase implementation complexity. - There are no unused features in RFC 8010/8011. - The Purge-Jobs operation (from RFC 2911) is DEPRECATED in RFC 8011 (page 73) with "SHOULD NOT support" because it destroys Printer accounting implementation. This operation has never been widely implemented in digital network printers. - The Restart-Job operation (from RFC 2911) is DEPRECATED in RFC 8011 (page 89) with "SHOULD NOT support" because it destroys Printer accounting implementation. This operation has never been widely implemented in digital network printers. (4) If the technology required to implement the specification requires patented or otherwise controlled technology, then the set of implementations must demonstrate at least two independent, separate and successful uses of the licensing process. - There is no patented or otherwise controlled technology that is required to implement IPP/1.1 per RFC 8010/8011. Personnel Alexey Melnikov is the responsible Area Director.
