A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Benchmarking Methodology Working Group of the IETF.
Title : Benchmarking Methodology for IGP Data Plane Route
Convergence
Author(s) : S. Poretsky, B. Imhoff
Filename : draft-ietf-bmwg-igp-dataplane-conv-meth-00.txt
Pages : 10
Date : 2003-6-19
This draft describes the methodology for benchmarking IGP Route
Convergence. The applicability of this testing is described in
[1] and the new terminology that it introduces is defined in [2].
Service Providers use IGP Convergence time as a key metric of
router design and architecture. Customers of Service Providers
observe convergence time by packet loss. IGP Route Convergence
is a Direct Measure of Quality (DMOQ) when benchmarking the data
plane and not the control plane. The test cases in this document
are black-box tests that emulate the network events that cause
route convergence, as described in [1]. Black-box test design
accounts for all of the factors for route convergence time, as
provided in [1]. The methodology and terminology is to be used
for benchmarking route convergence and can be applied to any
link-state IGP such as ISIS [3] and OSPF [4].
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-bmwg-igp-dataplane-conv-meth-00.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-bmwg-igp-dataplane-conv-meth-00.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-bmwg-igp-dataplane-conv-meth-00.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-bmwg-igp-dataplane-conv-meth-00.txt>
-
