A New Internet-Draft is available from the on-line Internet-Drafts directories.
This draft is a work item of the Common Control and Measurement Plane Working Group of the IETF.
Title : Generalized Multi-Protocol Label Switching
Architecture
Author(s) : E. Mannie
Filename : draft-ietf-ccamp-gmpls-architecture-07.txt
Pages : 58
Date : 2003-5-19
Future data and transmission networks will consist of elements such
as routers, switches, Dense Wavelength Division Multiplexing (DWDM)
systems, Add-Drop Multiplexors (ADMs), photonic cross-connects
(PXCs), optical cross-connects (OXCs), etc. that will use
Generalized Multi-Protocol Label Switching (GMPLS) to dynamically
provision resources and to provide network survivability using
protection and restoration techniques.
This document describes the architecture of GMPLS. GMPLS extends
MPLS to encompass time-division (e.g. SONET/SDH, PDH, G.709),
wavelength (lambdas), and spatial switching (e.g. incoming port or
fiber to outgoing port or fiber). The focus of GMPLS is on the
control plane of these various layers since each of them can use
physically diverse data or forwarding planes. The intention is to
cover both the signaling and the routing part of that control plane.
A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-architecture-07.txt
To remove yourself from the IETF Announcement list, send a message to
ietf-announce-request with the word unsubscribe in the body of the message.
Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
"get draft-ietf-ccamp-gmpls-architecture-07.txt".
A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt
Internet-Drafts can also be obtained by e-mail.
Send a message to:
mailserv@ietf.org.
In the body type:
"FILE /internet-drafts/draft-ietf-ccamp-gmpls-architecture-07.txt".
NOTE: The mail server at ietf.org can return the document in
MIME-encoded form by using the "mpack" utility. To use this
feature, insert the command "ENCODING mime" before the "FILE"
command. To decode the response(s), you will need "munpack" or
a MIME-compliant mail reader. Different MIME-compliant mail readers
exhibit different behavior, especially when dealing with
"multipart" MIME messages (i.e. documents which have been split
up into multiple messages), so check your local documentation on
how to manipulate these messages.
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.
- <ftp://ftp.ietf.org/internet-drafts/draft-ietf-ccamp-gmpls-architecture-07.txt>
-
