Hi, On 8/16/24 4:12 PM, Matthias Fetzer wrote: > Fan control on the E531 is done using the ACPI methods FANG and > FANW. The correct parameters and register values were found by > analyzing EC firmware as well as DSDT. This has been tested on > my Thinkpad Edge E531 (6885CTO, BIOS HEET52WW 1.33). > > Signed-off-by: Matthias Fetzer <kontakt@xxxxxxxxxxxxxxxxxx> Thank you for your patch, I've applied this patch to my review-hans branch: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/log/?h=review-hans Note it will show up in my review-hans branch once I've pushed my local branch there, which might take a while. Once I've run some tests on this branch the patches there will be added to the platform-drivers-x86/for-next branch and eventually will be included in the pdx86 pull-request to Linus for the next merge-window. Regards, Hans > --- > > Changes in v4: > - Remove unnecessary variable > Changes in v3: > - Add missing newline > - Remove redundant code > Changes in v2: > - Fix typo in EC memory description > - Split plausibilty check for better readability > > drivers/platform/x86/thinkpad_acpi.c | 143 ++++++++++++++++++++++++++- > 1 file changed, 142 insertions(+), 1 deletion(-) > > diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c > index 397b409064c9..96c58bc59018 100644 > --- a/drivers/platform/x86/thinkpad_acpi.c > +++ b/drivers/platform/x86/thinkpad_acpi.c > @@ -7751,6 +7751,28 @@ static struct ibm_struct volume_driver_data = { > * EC 0x2f (HFSP) might be available *for reading*, but do not use > * it for writing. > * > + * TPACPI_FAN_RD_ACPI_FANG: > + * ACPI FANG method: returns fan control register > + * > + * Takes one parameter which is 0x8100 plus the offset to EC memory > + * address 0xf500 and returns the byte at this address. > + * > + * 0xf500: > + * When the value is less than 9 automatic mode is enabled > + * 0xf502: > + * Contains the current fan speed from 0-100% > + * 0xf506: > + * Bit 7 has to be set in order to enable manual control by > + * writing a value >= 9 to 0xf500 > + * > + * TPACPI_FAN_WR_ACPI_FANW: > + * ACPI FANG method: sets fan control registers > + * > + * Takes 0x8100 plus the offset to EC memory address 0xf500 and the > + * value to be written there as parameters. > + * > + * see TPACPI_FAN_RD_ACPI_FANG > + * > * TPACPI_FAN_WR_TPEC: > * ThinkPad EC register 0x2f (HFSP): fan control loop mode > * Supported on almost all ThinkPads > @@ -7884,6 +7906,7 @@ enum { /* Fan control constants */ > enum fan_status_access_mode { > TPACPI_FAN_NONE = 0, /* No fan status or control */ > TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ > + TPACPI_FAN_RD_ACPI_FANG, /* Use ACPI FANG */ > TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ > TPACPI_FAN_RD_TPEC_NS, /* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */ > }; > @@ -7891,6 +7914,7 @@ enum fan_status_access_mode { > enum fan_control_access_mode { > TPACPI_FAN_WR_NONE = 0, /* No fan control */ > TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */ > + TPACPI_FAN_WR_ACPI_FANW, /* Use ACPI FANW */ > TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */ > TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */ > }; > @@ -7924,9 +7948,13 @@ TPACPI_HANDLE(fans, ec, "FANS"); /* X31, X40, X41 */ > TPACPI_HANDLE(gfan, ec, "GFAN", /* 570 */ > "\\FSPD", /* 600e/x, 770e, 770x */ > ); /* all others */ > +TPACPI_HANDLE(fang, ec, "FANG", /* E531 */ > + ); /* all others */ > TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */ > "JFNS", /* 770x-JL */ > ); /* all others */ > +TPACPI_HANDLE(fanw, ec, "FANW", /* E531 */ > + ); /* all others */ > > /* > * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the > @@ -8033,6 +8061,23 @@ static int fan_get_status(u8 *status) > > break; > } > + case TPACPI_FAN_RD_ACPI_FANG: { > + /* E531 */ > + int mode, speed; > + > + if (unlikely(!acpi_evalf(fang_handle, &mode, NULL, "dd", 0x8100))) > + return -EIO; > + if (unlikely(!acpi_evalf(fang_handle, &speed, NULL, "dd", 0x8102))) > + return -EIO; > + > + if (likely(status)) { > + *status = speed * 7 / 100; > + if (mode < 9) > + *status |= TP_EC_FAN_AUTO; > + } > + > + break; > + } > case TPACPI_FAN_RD_TPEC: > /* all except 570, 600e/x, 770e, 770x */ > if (unlikely(!acpi_ec_read(fan_status_offset, &s))) > @@ -8147,6 +8192,17 @@ static int fan2_get_speed(unsigned int *speed) > if (speed) > *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; > break; > + case TPACPI_FAN_RD_ACPI_FANG: { > + /* E531 */ > + int speed_tmp; > + > + if (unlikely(!acpi_evalf(fang_handle, &speed_tmp, NULL, "dd", 0x8102))) > + return -EIO; > + > + if (likely(speed)) > + *speed = speed_tmp * 65535 / 100; > + break; > + } > > default: > return -ENXIO; > @@ -8206,6 +8262,32 @@ static int fan_set_level(int level) > tp_features.fan_ctrl_status_undef = 0; > break; > > + case TPACPI_FAN_WR_ACPI_FANW: > + if (!(level & TP_EC_FAN_AUTO) && (level < 0 || level > 7)) > + return -EINVAL; > + if (level & TP_EC_FAN_FULLSPEED) > + return -EINVAL; > + > + if (level & TP_EC_FAN_AUTO) { > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8106, 0x05)) { > + return -EIO; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8100, 0x00)) { > + return -EIO; > + } > + } else { > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8106, 0x45)) { > + return -EIO; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8100, 0xff)) { > + return -EIO; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8102, level * 100 / 7)) { > + return -EIO; > + } > + } > + break; > + > default: > return -ENXIO; > } > @@ -8284,6 +8366,19 @@ static int fan_set_enable(void) > rc = 0; > break; > > + case TPACPI_FAN_WR_ACPI_FANW: > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8106, 0x05)) { > + rc = -EIO; > + break; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8100, 0x00)) { > + rc = -EIO; > + break; > + } > + > + rc = 0; > + break; > + > default: > rc = -ENXIO; > } > @@ -8326,6 +8421,22 @@ static int fan_set_disable(void) > fan_control_desired_level = 0; > break; > > + case TPACPI_FAN_WR_ACPI_FANW: > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8106, 0x45)) { > + rc = -EIO; > + break; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8100, 0xff)) { > + rc = -EIO; > + break; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8102, 0x00)) { > + rc = -EIO; > + break; > + } > + rc = 0; > + break; > + > default: > rc = -ENXIO; > } > @@ -8359,6 +8470,23 @@ static int fan_set_speed(int speed) > rc = -EINVAL; > break; > > + case TPACPI_FAN_WR_ACPI_FANW: > + if (speed >= 0 && speed <= 65535) { > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8106, 0x45)) { > + rc = -EIO; > + break; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", 0x8100, 0xff)) { > + rc = -EIO; > + break; > + } > + if (!acpi_evalf(fanw_handle, NULL, NULL, "vdd", > + 0x8102, speed * 100 / 65535)) > + rc = -EIO; > + } else > + rc = -EINVAL; > + break; > + > default: > rc = -ENXIO; > } > @@ -8701,6 +8829,10 @@ static int __init fan_init(struct ibm_init_struct *iibm) > TPACPI_ACPIHANDLE_INIT(gfan); > TPACPI_ACPIHANDLE_INIT(sfan); > } > + if (tpacpi_is_lenovo()) { > + TPACPI_ACPIHANDLE_INIT(fang); > + TPACPI_ACPIHANDLE_INIT(fanw); > + } > > quirks = tpacpi_check_quirks(fan_quirk_table, > ARRAY_SIZE(fan_quirk_table)); > @@ -8720,6 +8852,9 @@ static int __init fan_init(struct ibm_init_struct *iibm) > if (gfan_handle) { > /* 570, 600e/x, 770e, 770x */ > fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN; > + } else if (fang_handle) { > + /* E531 */ > + fan_status_access_mode = TPACPI_FAN_RD_ACPI_FANG; > } else { > /* all other ThinkPads: note that even old-style > * ThinkPad ECs supports the fan control register */ > @@ -8766,6 +8901,11 @@ static int __init fan_init(struct ibm_init_struct *iibm) > fan_control_access_mode = TPACPI_FAN_WR_ACPI_SFAN; > fan_control_commands |= > TPACPI_FAN_CMD_LEVEL | TPACPI_FAN_CMD_ENABLE; > + } else if (fanw_handle) { > + /* E531 */ > + fan_control_access_mode = TPACPI_FAN_WR_ACPI_FANW; > + fan_control_commands |= > + TPACPI_FAN_CMD_LEVEL | TPACPI_FAN_CMD_SPEED | TPACPI_FAN_CMD_ENABLE; > } else { > if (!gfan_handle) { > /* gfan without sfan means no fan control */ > @@ -8917,6 +9057,7 @@ static int fan_read(struct seq_file *m) > > case TPACPI_FAN_RD_TPEC_NS: > case TPACPI_FAN_RD_TPEC: > + case TPACPI_FAN_RD_ACPI_FANG: > /* all except 570, 600e/x, 770e, 770x */ > rc = fan_get_status_safe(&status); > if (rc) > @@ -8937,7 +9078,7 @@ static int fan_read(struct seq_file *m) > * No other levels settings available > */ > seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto"); > - } else { > + } else if (fan_status_access_mode == TPACPI_FAN_RD_TPEC) { > if (status & TP_EC_FAN_FULLSPEED) > /* Disengaged mode takes precedence */ > seq_printf(m, "level:\t\tdisengaged\n"); _______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
