Hi! > [ Upstream commit 66e92e23a72761f5b53f970aeb1badc5fd92fc74 ] > > Some ThinkPad systems ECFW use non-standard addresses for fan control > and reporting. This patch adds support for such ECFW so that it can report > the correct fan values. > Tested on Thinkpads L13 Yoga Gen 2 and X13 Yoga Gen 2. This is just a new feature, and is > 200 lines. We should not have this in stable. BR, Pavel > Suggested-by: Mark Pearson <mpearson-lenovo@xxxxxxxxx> > Signed-off-by: Vishnu Sankar <vishnuocv@xxxxxxxxx> > Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx> > Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> > Link: https://lore.kernel.org/r/20231214134702.166464-1-vishnuocv@xxxxxxxxx > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> > Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> > --- > drivers/platform/x86/thinkpad_acpi.c | 98 ++++++++++++++++++++++++---- > 1 file changed, 85 insertions(+), 13 deletions(-) > > diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c > index 05a55bc31c796..6edd2e294750e 100644 > --- a/drivers/platform/x86/thinkpad_acpi.c > +++ b/drivers/platform/x86/thinkpad_acpi.c > @@ -8149,8 +8149,19 @@ static struct ibm_struct volume_driver_data = { > * TPACPI_FAN_WR_TPEC is also available and should be used to > * command the fan. The X31/X40/X41 seems to have 8 fan levels, > * but the ACPI tables just mention level 7. > + * > + * TPACPI_FAN_RD_TPEC_NS: > + * This mode is used for a few ThinkPads (L13 Yoga Gen2, X13 Yoga Gen2 etc.) > + * that are using non-standard EC locations for reporting fan speeds. > + * Currently these platforms only provide fan rpm reporting. > + * > */ > > +#define FAN_RPM_CAL_CONST 491520 /* FAN RPM calculation offset for some non-standard ECFW */ > + > +#define FAN_NS_CTRL_STATUS BIT(2) /* Bit which determines control is enabled or not */ > +#define FAN_NS_CTRL BIT(4) /* Bit which determines control is by host or EC */ > + > enum { /* Fan control constants */ > fan_status_offset = 0x2f, /* EC register 0x2f */ > fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM) > @@ -8158,6 +8169,11 @@ enum { /* Fan control constants */ > fan_select_offset = 0x31, /* EC register 0x31 (Firmware 7M) > bit 0 selects which fan is active */ > > + fan_status_offset_ns = 0x93, /* Special status/control offset for non-standard EC Fan1 */ > + fan2_status_offset_ns = 0x96, /* Special status/control offset for non-standard EC Fan2 */ > + fan_rpm_status_ns = 0x95, /* Special offset for Fan1 RPM status for non-standard EC */ > + fan2_rpm_status_ns = 0x98, /* Special offset for Fan2 RPM status for non-standard EC */ > + > TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */ > TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */ > > @@ -8168,6 +8184,7 @@ enum fan_status_access_mode { > TPACPI_FAN_NONE = 0, /* No fan status or control */ > TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */ > TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */ > + TPACPI_FAN_RD_TPEC_NS, /* Use non-standard ACPI EC regs (eg: L13 Yoga gen2 etc.) */ > }; > > enum fan_control_access_mode { > @@ -8195,6 +8212,8 @@ static u8 fan_control_desired_level; > static u8 fan_control_resume_level; > static int fan_watchdog_maxinterval; > > +static bool fan_with_ns_addr; > + > static struct mutex fan_mutex; > > static void fan_watchdog_fire(struct work_struct *ignored); > @@ -8325,6 +8344,15 @@ static int fan_get_status(u8 *status) > } > > break; > + case TPACPI_FAN_RD_TPEC_NS: > + /* Default mode is AUTO which means controlled by EC */ > + if (!acpi_ec_read(fan_status_offset_ns, &s)) > + return -EIO; > + > + if (status) > + *status = s; > + > + break; > > default: > return -ENXIO; > @@ -8341,7 +8369,8 @@ static int fan_get_status_safe(u8 *status) > if (mutex_lock_killable(&fan_mutex)) > return -ERESTARTSYS; > rc = fan_get_status(&s); > - if (!rc) > + /* NS EC doesn't have register with level settings */ > + if (!rc && !fan_with_ns_addr) > fan_update_desired_level(s); > mutex_unlock(&fan_mutex); > > @@ -8368,7 +8397,13 @@ static int fan_get_speed(unsigned int *speed) > > if (likely(speed)) > *speed = (hi << 8) | lo; > + break; > + case TPACPI_FAN_RD_TPEC_NS: > + if (!acpi_ec_read(fan_rpm_status_ns, &lo)) > + return -EIO; > > + if (speed) > + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; > break; > > default: > @@ -8380,7 +8415,7 @@ static int fan_get_speed(unsigned int *speed) > > static int fan2_get_speed(unsigned int *speed) > { > - u8 hi, lo; > + u8 hi, lo, status; > bool rc; > > switch (fan_status_access_mode) { > @@ -8396,7 +8431,21 @@ static int fan2_get_speed(unsigned int *speed) > > if (likely(speed)) > *speed = (hi << 8) | lo; > + break; > > + case TPACPI_FAN_RD_TPEC_NS: > + rc = !acpi_ec_read(fan2_status_offset_ns, &status); > + if (rc) > + return -EIO; > + if (!(status & FAN_NS_CTRL_STATUS)) { > + pr_info("secondary fan control not supported\n"); > + return -EIO; > + } > + rc = !acpi_ec_read(fan2_rpm_status_ns, &lo); > + if (rc) > + return -EIO; > + if (speed) > + *speed = lo ? FAN_RPM_CAL_CONST / lo : 0; > break; > > default: > @@ -8899,6 +8948,7 @@ static const struct attribute_group fan_driver_attr_group = { > #define TPACPI_FAN_2FAN 0x0002 /* EC 0x31 bit 0 selects fan2 */ > #define TPACPI_FAN_2CTL 0x0004 /* selects fan2 control */ > #define TPACPI_FAN_NOFAN 0x0008 /* no fan available */ > +#define TPACPI_FAN_NS 0x0010 /* For EC with non-Standard register addresses */ > > static const struct tpacpi_quirk fan_quirk_table[] __initconst = { > TPACPI_QEC_IBM('1', 'Y', TPACPI_FAN_Q1), > @@ -8917,6 +8967,8 @@ static const struct tpacpi_quirk fan_quirk_table[] __initconst = { > TPACPI_Q_LNV3('N', '2', 'O', TPACPI_FAN_2CTL), /* P1 / X1 Extreme (2nd gen) */ > TPACPI_Q_LNV3('N', '3', '0', TPACPI_FAN_2CTL), /* P15 (1st gen) / P15v (1st gen) */ > TPACPI_Q_LNV3('N', '3', '7', TPACPI_FAN_2CTL), /* T15g (2nd gen) */ > + TPACPI_Q_LNV3('R', '1', 'F', TPACPI_FAN_NS), /* L13 Yoga Gen 2 */ > + TPACPI_Q_LNV3('N', '2', 'U', TPACPI_FAN_NS), /* X13 Yoga Gen 2*/ > TPACPI_Q_LNV3('N', '1', 'O', TPACPI_FAN_NOFAN), /* X1 Tablet (2nd gen) */ > }; > > @@ -8951,18 +9003,27 @@ static int __init fan_init(struct ibm_init_struct *iibm) > return -ENODEV; > } > > + if (quirks & TPACPI_FAN_NS) { > + pr_info("ECFW with non-standard fan reg control found\n"); > + fan_with_ns_addr = 1; > + /* Fan ctrl support from host is undefined for now */ > + tp_features.fan_ctrl_status_undef = 1; > + } > + > if (gfan_handle) { > /* 570, 600e/x, 770e, 770x */ > fan_status_access_mode = TPACPI_FAN_RD_ACPI_GFAN; > } else { > /* all other ThinkPads: note that even old-style > * ThinkPad ECs supports the fan control register */ > - if (likely(acpi_ec_read(fan_status_offset, > - &fan_control_initial_status))) { > + if (fan_with_ns_addr || > + likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) { > int res; > unsigned int speed; > > - fan_status_access_mode = TPACPI_FAN_RD_TPEC; > + fan_status_access_mode = fan_with_ns_addr ? > + TPACPI_FAN_RD_TPEC_NS : TPACPI_FAN_RD_TPEC; > + > if (quirks & TPACPI_FAN_Q1) > fan_quirk1_setup(); > /* Try and probe the 2nd fan */ > @@ -8971,7 +9032,8 @@ static int __init fan_init(struct ibm_init_struct *iibm) > if (res >= 0 && speed != FAN_NOT_PRESENT) { > /* It responded - so let's assume it's there */ > tp_features.second_fan = 1; > - tp_features.second_fan_ctl = 1; > + /* fan control not currently available for ns ECFW */ > + tp_features.second_fan_ctl = !fan_with_ns_addr; > pr_info("secondary fan control detected & enabled\n"); > } else { > /* Fan not auto-detected */ > @@ -9146,6 +9208,7 @@ static int fan_read(struct seq_file *m) > str_enabled_disabled(status), status); > break; > > + case TPACPI_FAN_RD_TPEC_NS: > case TPACPI_FAN_RD_TPEC: > /* all except 570, 600e/x, 770e, 770x */ > rc = fan_get_status_safe(&status); > @@ -9160,13 +9223,22 @@ static int fan_read(struct seq_file *m) > > seq_printf(m, "speed:\t\t%d\n", speed); > > - if (status & TP_EC_FAN_FULLSPEED) > - /* Disengaged mode takes precedence */ > - seq_printf(m, "level:\t\tdisengaged\n"); > - else if (status & TP_EC_FAN_AUTO) > - seq_printf(m, "level:\t\tauto\n"); > - else > - seq_printf(m, "level:\t\t%d\n", status); > + if (fan_status_access_mode == TPACPI_FAN_RD_TPEC_NS) { > + /* > + * No full speed bit in NS EC > + * EC Auto mode is set by default. > + * No other levels settings available > + */ > + seq_printf(m, "level:\t\t%s\n", status & FAN_NS_CTRL ? "unknown" : "auto"); > + } else { > + if (status & TP_EC_FAN_FULLSPEED) > + /* Disengaged mode takes precedence */ > + seq_printf(m, "level:\t\tdisengaged\n"); > + else if (status & TP_EC_FAN_AUTO) > + seq_printf(m, "level:\t\tauto\n"); > + else > + seq_printf(m, "level:\t\t%d\n", status); > + } > break; > > case TPACPI_FAN_NONE: -- People of Russia, stop Putin before his war on Ukraine escalates.
Attachment:
signature.asc
Description: PGP signature
_______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
