On Fri, Aug 19, 2022 at 12:06 AM Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote: > > Follow the advice of the below link and prefer 'strscpy' in this We refer to the functions like this: strscpy() (note no quote marks). > subsystem. Conversion is 1:1 because the return value is not used. > Generated by a coccinelle script. I assume you are experimenting with coccinelle, so I have no objection to the change, but in PDx86 we usually want to have one patch per driver. Can you split? You also may add Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx> to each of them. > Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@xxxxxxxxxxxxxx/ > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> > --- > drivers/platform/surface/surface3_power.c | 2 +- > drivers/platform/x86/dell/dell-wmi-sysman/sysman.c | 2 +- > drivers/platform/x86/intel/chtwc_int33fe.c | 6 +++--- > drivers/platform/x86/thinkpad_acpi.c | 4 ++-- > 4 files changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/platform/surface/surface3_power.c b/drivers/platform/surface/surface3_power.c > index 444ec81ba02d..4c53d116d59b 100644 > --- a/drivers/platform/surface/surface3_power.c > +++ b/drivers/platform/surface/surface3_power.c > @@ -519,7 +519,7 @@ static int mshw0011_probe(struct i2c_client *client) > i2c_set_clientdata(client, data); > > memset(&board_info, 0, sizeof(board_info)); > - strlcpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE); > + strscpy(board_info.type, "MSHW0011-bat0", I2C_NAME_SIZE); > > bat0 = i2c_acpi_new_device(dev, 1, &board_info); > if (IS_ERR(bat0)) > diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c > index 636bdfa83284..0a6411a8a104 100644 > --- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c > +++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c > @@ -270,7 +270,7 @@ void strlcpy_attr(char *dest, char *src) > size_t len = strlen(src) + 1; > > if (len > 1 && len <= MAX_BUFF) > - strlcpy(dest, src, len); > + strscpy(dest, src, len); > > /*len can be zero because any property not-applicable to attribute can > * be empty so check only for too long buffers and log error > diff --git a/drivers/platform/x86/intel/chtwc_int33fe.c b/drivers/platform/x86/intel/chtwc_int33fe.c > index c52ac23e2331..1ea989df513c 100644 > --- a/drivers/platform/x86/intel/chtwc_int33fe.c > +++ b/drivers/platform/x86/intel/chtwc_int33fe.c > @@ -270,7 +270,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data) > } > > memset(&board_info, 0, sizeof(board_info)); > - strlcpy(board_info.type, "max17047", I2C_NAME_SIZE); > + strscpy(board_info.type, "max17047", I2C_NAME_SIZE); > board_info.dev_name = "max17047"; > board_info.fwnode = fwnode; > data->battery_fg = i2c_acpi_new_device(dev, 1, &board_info); > @@ -361,7 +361,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev) > } > > memset(&board_info, 0, sizeof(board_info)); > - strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); > + strscpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE); > board_info.dev_name = "fusb302"; > board_info.fwnode = fwnode; > board_info.irq = fusb302_irq; > @@ -381,7 +381,7 @@ static int cht_int33fe_typec_probe(struct platform_device *pdev) > memset(&board_info, 0, sizeof(board_info)); > board_info.dev_name = "pi3usb30532"; > board_info.fwnode = fwnode; > - strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); > + strscpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE); > > data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info); > if (IS_ERR(data->pi3usb30532)) { > diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c > index 22d4e8633e30..8dad0428a83c 100644 > --- a/drivers/platform/x86/thinkpad_acpi.c > +++ b/drivers/platform/x86/thinkpad_acpi.c > @@ -7623,9 +7623,9 @@ static int __init volume_create_alsa_mixer(void) > data = card->private_data; > data->card = card; > > - strlcpy(card->driver, TPACPI_ALSA_DRVNAME, > + strscpy(card->driver, TPACPI_ALSA_DRVNAME, > sizeof(card->driver)); > - strlcpy(card->shortname, TPACPI_ALSA_SHRTNAME, > + strscpy(card->shortname, TPACPI_ALSA_SHRTNAME, > sizeof(card->shortname)); > snprintf(card->mixername, sizeof(card->mixername), "ThinkPad EC %s", > (thinkpad_id.ec_version_str) ? > -- > 2.35.1 > -- With Best Regards, Andy Shevchenko _______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
