Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers to allow the OS to determine the angle between the display and the base of the device. On Windows these are read by a special HingeAngleService process which calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is in tablet- or laptop-mode. The firmware may use this to disable the kbd and touchpad to avoid spurious input in tablet-mode as well as to report SW_TABLET_MODE info to the OS. Since Linux does not call these undocumented methods, the SW_TABLET_MODE info reported by various pdx86 drivers is incorrect on these devices. Before this commit the intel-hid and thinkpad_acpi code already had 2 hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid reporting broken info. And now we also have a bug-report about the same problem in the intel-vbtn code. Since there are at least 3 different ACPI hardware-ids in play, add a new dual_accel_detect() helper which checks for all 3, rather then adding different hardware-ids to the drivers as bug-reports trickle in. Having shared code which checks all known hardware-ids is esp. important for the intel-hid and intel-vbtn drivers as these are generic drivers which are used on a lot of devices. The BOSC0200 hardware-id requires special handling, because often it is used for a single-accelerometer setup. Only in a few cases it refers to a dual-accel setup, in which case there will be 2 I2cSerialBus resources in the device's resource-list, so the helper checks for this. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011 Reported-and-tested-by: Julius Lehmann <julius@xxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- Changes from RFC: -Add Julius' Reported-and-tested-by --- drivers/platform/x86/Kconfig | 3 + drivers/platform/x86/dual_accel_detect.h | 75 ++++++++++++++++++++++++ drivers/platform/x86/intel-hid.c | 21 ++----- drivers/platform/x86/intel-vbtn.c | 18 +++++- drivers/platform/x86/thinkpad_acpi.c | 3 +- 5 files changed, 101 insertions(+), 19 deletions(-) create mode 100644 drivers/platform/x86/dual_accel_detect.h diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 7d385c3b2239..d12db6c316ea 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -508,6 +508,7 @@ config THINKPAD_ACPI depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE + depends on I2C select ACPI_PLATFORM_PROFILE select HWMON select NVRAM @@ -691,6 +692,7 @@ config INTEL_HID_EVENT tristate "INTEL HID Event" depends on ACPI depends on INPUT + depends on I2C select INPUT_SPARSEKMAP help This driver provides support for the Intel HID Event hotkey interface. @@ -742,6 +744,7 @@ config INTEL_VBTN tristate "INTEL VIRTUAL BUTTON" depends on ACPI depends on INPUT + depends on I2C select INPUT_SPARSEKMAP help This driver provides support for the Intel Virtual Button interface. diff --git a/drivers/platform/x86/dual_accel_detect.h b/drivers/platform/x86/dual_accel_detect.h new file mode 100644 index 000000000000..1a069159da91 --- /dev/null +++ b/drivers/platform/x86/dual_accel_detect.h @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Helper code to detect 360 degree hinges (yoga) style 2-in-1 devices using 2 accelerometers + * to allow the OS to determine the angle between the display and the base of the device. + * + * On Windows these are read by a special HingeAngleService process which calls undocumented + * ACPI methods, to let the firmware know if the 2-in-1 is in tablet- or laptop-mode. + * The firmware may use this to disable the kbd and touchpad to avoid spurious input in + * tablet-mode as well as to report SW_TABLET_MODE info to the OS. + * + * Since Linux does not call these undocumented methods, the SW_TABLET_MODE info reported + * by various drivers/platform/x86 drivers is incorrect. These drivers use the detection + * code in this file to disable SW_TABLET_MODE reporting to avoid reporting broken info + * (instead userspace can derive the status itself by directly reading the 2 accels). + */ + +#include <linux/acpi.h> +#include <linux/i2c.h> + +static int dual_accel_i2c_resource_count(struct acpi_resource *ares, void *data) +{ + struct acpi_resource_i2c_serialbus *sb; + int *count = data; + + if (i2c_acpi_get_i2c_resource(ares, &sb)) + *count = *count + 1; + + return 1; +} + +static int dual_accel_i2c_client_count(struct acpi_device *adev) +{ + int ret, count = 0; + LIST_HEAD(r); + + ret = acpi_dev_get_resources(adev, &r, dual_accel_i2c_resource_count, &count); + if (ret < 0) + return ret; + + acpi_dev_free_resource_list(&r); + return count; +} + +static bool dual_accel_detect_bosc0200(void) +{ + struct acpi_device *adev; + int count; + + adev = acpi_dev_get_first_match_dev("BOSC0200", NULL, -1); + if (!adev) + return false; + + count = dual_accel_i2c_client_count(adev); + + acpi_dev_put(adev); + + return count == 2; +} + +static bool dual_accel_detect(void) +{ + /* Systems which use a pair of accels with KIOX010A / KIOX020A ACPI ids */ + if (acpi_dev_present("KIOX010A", NULL, -1)) + return true; + + /* Systems which use a single DUAL250E ACPI device to model 2 accels */ + if (acpi_dev_present("DUAL250E", NULL, -1)) + return true; + + /* Systems which use a single BOSC0200 ACPI device to model 2 accels */ + if (dual_accel_detect_bosc0200()) + return true; + + return false; +} diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index e5fbe017f8e1..2e4e97a626a5 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/suspend.h> +#include "dual_accel_detect.h" /* When NOT in tablet mode, VGBS returns with the flag 0x40 */ #define TABLET_MODE_FLAG BIT(6) @@ -122,6 +123,7 @@ struct intel_hid_priv { struct input_dev *array; struct input_dev *switches; bool wakeup_mode; + bool dual_accel; }; #define HID_EVENT_FILTER_UUID "eeec56b3-4442-408f-a792-4edd4d758054" @@ -451,22 +453,9 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) * SW_TABLET_MODE report, in these cases we enable support when receiving * the first event instead of during driver setup. * - * Some 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers - * to allow the OS to determine the angle between the display and the base - * of the device. On Windows these are read by a special HingeAngleService - * process which calls an ACPI DSM (Device Specific Method) on the - * ACPI KIOX010A device node for the sensor in the display, to let the - * firmware know if the 2-in-1 is in tablet- or laptop-mode so that it can - * disable the kbd and touchpad to avoid spurious input in tablet-mode. - * - * The linux kxcjk1013 driver calls the DSM for this once at probe time - * to ensure that the builtin kbd and touchpad work. On some devices this - * causes a "spurious" 0xcd event on the intel-hid ACPI dev. In this case - * there is not a functional tablet-mode switch, so we should not register - * the tablet-mode switch device. + * See dual_accel_detect.h for more info on the dual_accel check. */ - if (!priv->switches && (event == 0xcc || event == 0xcd) && - !acpi_dev_present("KIOX010A", NULL, -1)) { + if (!priv->switches && !priv->dual_accel && (event == 0xcc || event == 0xcd)) { dev_info(&device->dev, "switch event received, enable switches supports\n"); err = intel_hid_switches_setup(device); if (err) @@ -607,6 +596,8 @@ static int intel_hid_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); + priv->dual_accel = dual_accel_detect(); + err = intel_hid_input_setup(device); if (err) { pr_err("Failed to setup Intel HID hotkeys\n"); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 888a764efad1..309166431063 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/suspend.h> +#include "dual_accel_detect.h" /* Returned when NOT in tablet mode on some HP Stream x360 11 models */ #define VGBS_TABLET_MODE_FLAG_ALT 0x10 @@ -66,6 +67,7 @@ static const struct key_entry intel_vbtn_switchmap[] = { struct intel_vbtn_priv { struct input_dev *buttons_dev; struct input_dev *switches_dev; + bool dual_accel; bool has_buttons; bool has_switches; bool wakeup_mode; @@ -160,6 +162,10 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) input_dev = priv->buttons_dev; } else if ((ke = sparse_keymap_entry_from_scancode(priv->switches_dev, event))) { if (!priv->has_switches) { + /* See dual_accel_detect.h for more info */ + if (priv->dual_accel) + return; + dev_info(&device->dev, "Registering Intel Virtual Switches input-dev after receiving a switch event\n"); ret = input_register_device(priv->switches_dev); if (ret) @@ -248,11 +254,15 @@ static const struct dmi_system_id dmi_switches_allow_list[] = { {} /* Array terminator */ }; -static bool intel_vbtn_has_switches(acpi_handle handle) +static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) { unsigned long long vgbs; acpi_status status; + /* See dual_accel_detect.h for more info */ + if (dual_accel) + return false; + if (!dmi_check_system(dmi_switches_allow_list)) return false; @@ -263,13 +273,14 @@ static bool intel_vbtn_has_switches(acpi_handle handle) static int intel_vbtn_probe(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); - bool has_buttons, has_switches; + bool dual_accel, has_buttons, has_switches; struct intel_vbtn_priv *priv; acpi_status status; int err; + dual_accel = dual_accel_detect(); has_buttons = acpi_has_method(handle, "VBDL"); - has_switches = intel_vbtn_has_switches(handle); + has_switches = intel_vbtn_has_switches(handle, dual_accel); if (!has_buttons && !has_switches) { dev_warn(&device->dev, "failed to read Intel Virtual Button driver\n"); @@ -281,6 +292,7 @@ static int intel_vbtn_probe(struct platform_device *device) return -ENOMEM; dev_set_drvdata(&device->dev, priv); + priv->dual_accel = dual_accel; priv->has_buttons = has_buttons; priv->has_switches = has_switches; diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 603156a6e3ed..50ff04c84650 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -73,6 +73,7 @@ #include <linux/uaccess.h> #include <acpi/battery.h> #include <acpi/video.h> +#include "dual_accel_detect.h" /* ThinkPad CMOS commands */ #define TP_CMOS_VOLUME_DOWN 0 @@ -3232,7 +3233,7 @@ static int hotkey_init_tablet_mode(void) * the laptop/tent/tablet mode to the EC. The bmc150 iio driver * does not support this, so skip the hotkey on these models. */ - if (has_tablet_mode && !acpi_dev_present("BOSC0200", "1", -1)) + if (has_tablet_mode && !dual_accel_detect()) tp_features.hotkey_tablet = TP_HOTKEY_TABLET_USES_GMMS; type = "GMMS"; } else if (acpi_evalf(hkey_handle, &res, "MHKG", "qd")) { -- 2.31.1 _______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
