Re: Well-known LED names was Re: [PATCH 0/6] Introduce audio-mute LED trigger (and conversions to it)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Pavel,

On 12/1/18 3:41 PM, Pavel Machek wrote:
Hi!

If external USB keyboard is identified as "input7" device, then
"input7::mute" is a good name for mute key. But "sys::mute" does not say
anything to which device or hardware it belongs nor does not solve
problem that which device/driver/subsystem should have privilege to take
this "sys" name.

How about just "platform" for the LEDs being part of the device
on which the system is running?

"platform" works for me.

Are we in agreement that this name will be used for all similar LEDs,
as long as they are on the "main box" of the device, no matter if they
are connected using acpi, gpio, i2c, ...?

One doubt: say we have hdd activity LED on the "main box" - it
would be named "platform::disk".

Now, we add external USB disk. Previously we were considering
the naming for disk LEDs in the form e.g. "sdb::disk".

If so, there would be discrepancy between internal and external disk
LED names. Similarly in case of eth/adsl/wlan/camera LEDs.

Well, it really depends if the "plaform::disk" is for all the disks,
or if it is for sda. In the second case, it might be better to name it
sda::disk...

Anyway... I believe we should start documenting good and bad LEDs, so
that patch authors know what is there, and can try to be consistent,
and so that userland knows what names to probe for.

The idea looks reasonable. In addition to that, I'd change one
thing in the LED naming pattern - replace "devicename " with
"affiliation". AFAICS that would fit best for both "platform"
and e.g. "input*".

Also in the DT we would need related "affiliation" property.
In most cases it would be "platform" probably.
Possible is also "camera" - but we would have to state it clear
how to proceed in case of video devices - shouldn't v4l2
drivers create LEDs similarly to how network drivers do that.
Then it would be possible to provide videoN name.

What about following? Any other LEDs worth mentioning?
disk: sdX
network devices: ethN, adslN

These "affiliations" would have to be provided by the
network drivers creating LED class devices.

commit c56708addf9c312cefd760bca218a0545258b217
Author: Pavel <pavel@xxxxxx>
Date:   Sat Dec 1 15:32:13 2018 +0100

leds: Add list of well-known LED names
Signed-off-by: Pavel Machek <pavel@xxxxxx>

diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt
new file mode 100644
index 0000000..9a262db
--- /dev/null
+++ b/Documentation/leds/well-known-leds.txt
@@ -0,0 +1,42 @@
+-*- org -*-
+
+It is somehow important to provide consistent interface to the
+userland. LED devices have one problem there, and that is naming of
+directories in /sys/class/leds. It would be nice if userland would
+just know right "name" for given LED function, but situation got more
+complex.
+
+Anyway, if backwards compatibility is not an issue, new code should
+use one of the "good" names from this list, and you should extend the
+list where applicable.
+
+Bad names are listed, too, in case you are writing application that
+wants to use particular feature, you should probe for good name first
+but then try the bad ones, too".
+
+* Keyboards
+
+Good: "input*:*:capslock"
+Good: "input*:*:scrolllock"
+Good: "input*:*:numlock"
+
+Set of common keyboard LEDs, going back to PC AT or so.
+
+Bad: "tpacpi::thinklight" (IBM/Lenovo Thinkpads)
+Bad: "lp5523:kb{1,2,3,4,5,6,7}" (Nokia N900)
+
+Keyboard frontlight/backlight.

Isn't example missing here?

+
+* Sound subsystem
+
+Good: "platform:*:mute"
+Good: "platform:*:micmute"
+
+LEDs on notebook body, indicating that sound input / output is muted.
+
+* System notification
+
+Good: "status-led:{red,green,blue}" (Motorola Droid 4)

Two problems here:
- "status-led" is in place of "devicename" instead of "function"
- "-led" is obvious and non-generic - we will have "status"
  in the "functions.h"

+Bad: "lp5523:{r,g,b}" (Nokia N900)
+
+Phones usually have multi-color status LED.




--
Best regards,
Jacek Anaszewski


_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel



[Index of Archives]     [Linux ACPI]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Photo]     [Yosemite Photos]     [Yosemite Advice]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Device Mapper]

  Powered by Linux