thinkpad_acpi registers two new attributes for each battery:
1) Charge start threshold
/sys/class/power_supply/BATN/charge_start_threshold
Valid values are [0, 99]. A value of 0 turns off the
start threshold wear control.
2) Charge stop threshold
/sys/class/power_supply/BATN/charge_stop_threshold
Valid values are [1, 100]. A value of 100 turns off
the stop threshold wear control. This must be
configured first.
This patch depends on the following patches:
"battery: Add the battery hooking API"
---
v2:
* Re-write the patch to make the changes in
battery.c generic as suggested by Rafael
v3:
* Fixed a bug where you could not set the stop
threshold to 100% when the start threshold is 0%
* Fixed the "Not Charging" quirk to match Lenovo's
BIOS Firmware specification
v4:
* Fixed a bug where you could not set the start
threshold to >stop if stop was 100%
v5:
* Migrated from symbol_get to native linking,
to fix module dependencies
* Fixed a bug where unloading the module would
cause a BUG inside battery
* Fixed a bug where you could unload battery
before unloading thinkpad_acpi
v6:
* Fixed all the style and naming issues pointed
out by Andy Shevchenko
v7:
* No changes in this patch in v7
v8:
* No changes in this patch in v8
v9:
* Use DEVICE_ATTR_RW instead of DEVICE_ATTR
* Use bitopts.h instead of raw operators
* Remove redundant whitespaces
* Remove redundant comments
* Move the power_supply changes to separate patch
* Fix other various styling issues pointed out by
Andy Shevchenko
v10:
* Fix a pasting error from v6 that prevents the setting
of the start threshold with EINVAL
Signed-off-by: Ognjen Galic <smclt30p@xxxxxxxxx>
---
drivers/platform/x86/Kconfig | 1 +
drivers/platform/x86/thinkpad_acpi.c | 440 ++++++++++++++++++++++++++++++++++-
2 files changed, 440 insertions(+), 1 deletion(-)
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 2c745e8..d705c62 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -399,6 +399,7 @@ config SURFACE3_WMI
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on ACPI
+ depends on ACPI_BATTERY
depends on INPUT
depends on RFKILL || RFKILL = n
depends on ACPI_VIDEO || ACPI_VIDEO = n
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 117be48..f8291aa 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -23,7 +23,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#define TPACPI_VERSION "0.25"
+#define TPACPI_VERSION "0.26"
#define TPACPI_SYSFS_VERSION 0x030000
/*
@@ -66,6 +66,7 @@
#include <linux/seq_file.h>
#include <linux/sysfs.h>
#include <linux/backlight.h>
+#include <linux/bitops.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
@@ -78,11 +79,13 @@
#include <linux/workqueue.h>
#include <linux/acpi.h>
#include <linux/pci_ids.h>
+#include <linux/power_supply.h>
#include <linux/thinkpad_acpi.h>
#include <sound/core.h>
#include <sound/control.h>
#include <sound/initval.h>
#include <linux/uaccess.h>
+#include <acpi/battery.h>
#include <acpi/video.h>
/* ThinkPad CMOS commands */
@@ -331,6 +334,7 @@ static struct {
u32 sensors_pdev_attrs_registered:1;
u32 hotkey_poll_active:1;
u32 has_adaptive_kbd:1;
+ u32 battery:1;
} tp_features;
static struct {
@@ -9201,6 +9205,436 @@ static struct ibm_struct mute_led_driver_data = {
.resume = mute_led_resume,
};
+/***************** Battery Wear Control Driver ******************/
+
+/* Metadata */
+
+#define GET_START "BCTG"
+#define SET_START "BCCS"
+#define GET_STOP "BCSG"
+#define SET_STOP "BCSS"
+
+#define START_ATTR "charge_start_threshold"
+#define STOP_ATTR "charge_stop_threshold"
+
+enum {
+ BAT_ANY = 0,
+ BAT_PRIMARY = 1,
+ BAT_SECONDARY = 2
+};
+
+enum {
+ /* Error condition bit */
+ METHOD_ERR = BIT(31),
+};
+
+enum {
+ /* This is used in the get/set helpers */
+ THRESHOLD_START,
+ THRESHOLD_STOP,
+};
+
+struct tpacpi_battery_data {
+ int charge_start;
+ int start_support;
+ int charge_stop;
+ int stop_support;
+};
+
+struct tpacpi_battery_driver_data {
+ struct tpacpi_battery_data batteries[3];
+ int individual_addressing;
+};
+
+static struct tpacpi_battery_driver_data battery_info;
+
+/* ACPI helpers/functions/probes */
+
+/**
+ * This evaluates a ACPI method call specific to the battery
+ * ACPI extension. The specifics are that an error is marked
+ * in the 32rd bit of the response, so we just check that here.
+ *
+ * Returns 0 on success
+ */
+static int tpacpi_battery_acpi_eval(char *method, int *ret, int param)
+{
+ if (!acpi_evalf(hkey_handle, ret, method, "dd", param)) {
+ acpi_handle_err(hkey_handle, "%s: evaluate failed", method);
+ return AE_ERROR;
+ }
+
+ if (*ret & METHOD_ERR) {
+ acpi_handle_err(hkey_handle,
+ "%s evaluated but flagged as error", method);
+ return AE_ERROR;
+ }
+
+ return AE_OK;
+}
+
+static int tpacpi_battery_get(int what, int battery, int *ret)
+{
+ switch (what) {
+
+ case THRESHOLD_START:
+
+ if (tpacpi_battery_acpi_eval(GET_START, ret, battery))
+ return -ENODEV;
+
+ /* The value is in the low 8 bits of the response */
+ *ret = *ret & 0xFF;
+ return 0;
+
+ case THRESHOLD_STOP:
+
+ if (tpacpi_battery_acpi_eval(GET_STOP, ret, battery))
+ return -ENODEV;
+
+ /* Value is in lower 8 bits */
+ *ret = *ret & 0xFF;
+
+ /*
+ * On the stop value, if we return 0 that
+ * does not make any sense. 0 means Default, which
+ * means that charging stops at 100%, so we return
+ * that.
+ */
+ if (*ret == 0)
+ *ret = 100;
+
+ return 0;
+
+ default:
+ pr_crit("wrong parameter: %d", what);
+ return -EINVAL;
+ }
+
+}
+
+static int tpacpi_battery_set(int what, int battery, int value)
+{
+ int param, ret;
+
+ /* The first 8 bits are the value of the threshold */
+ param = value;
+ /* The battery ID is in bits 8-9, 2 bits */
+ param |= battery << 8;
+
+ switch (what) {
+
+ case THRESHOLD_START:
+
+ if (tpacpi_battery_acpi_eval(SET_START, &ret, param)) {
+ pr_err("failed to set charge threshold on battery %d",
+ battery);
+ return -ENODEV;
+ }
+
+ return 0;
+
+ case THRESHOLD_STOP:
+
+ if (tpacpi_battery_acpi_eval(SET_STOP, &ret, param)) {
+ pr_err("failed to set charge stop threshold: %d", battery);
+ return -ENODEV;
+ }
+
+ return 0;
+
+ default:
+ pr_crit("wrong parameter: %d", what);
+ return -EINVAL;
+ }
+}
+
+static int tpacpi_battery_probe(int battery)
+{
+ int ret = 0;
+
+ memset(&battery_info, 0, sizeof(struct tpacpi_battery_driver_data));
+
+ /*
+ * 1) Get the current start threshold
+ * 2) Check for support
+ * 3) Get the current stop threshold
+ * 4) Check for support
+ */
+
+ if (acpi_has_method(hkey_handle, GET_START)) {
+
+ if (tpacpi_battery_acpi_eval(GET_START, &ret, battery)) {
+ pr_err("Error probing battery %d\n", battery);
+ return -ENODEV;
+ }
+
+ /* Individual addressing is in bit 9 */
+ if (ret & BIT(9))
+ battery_info.individual_addressing = true;
+
+ /* Support is marked in bit 8 */
+ if (ret & BIT(8))
+ battery_info.batteries[battery].start_support = 1;
+ else
+ return -ENODEV;
+
+ if (tpacpi_battery_get(THRESHOLD_START, battery,
+ &battery_info.batteries[battery].charge_start)) {
+ pr_err("Error probing battery %d\n", battery);
+ return -ENODEV;
+ }
+
+ }
+
+ if (acpi_has_method(hkey_handle, GET_STOP)) {
+
+ if (tpacpi_battery_acpi_eval(GET_STOP, &ret, battery)) {
+ pr_err("Error probing battery stop; %d\n", battery);
+ return -ENODEV;
+ }
+
+ /* Support is marked in bit 8 */
+ if (ret & BIT(8))
+ battery_info.batteries[battery].stop_support = 1;
+ else
+ return -ENODEV;
+
+ if (tpacpi_battery_get(THRESHOLD_STOP, battery,
+ &battery_info.batteries[battery].charge_stop)) {
+ pr_err("Error probing battery stop: %d\n", battery);
+ return -ENODEV;
+ }
+ }
+
+ pr_info("battery %d registered (start %d, stop %d)",
+ battery,
+ battery_info.batteries[battery].charge_start,
+ battery_info.batteries[battery].charge_stop);
+
+ return 0;
+}
+
+/* General helper functions */
+
+static int tpacpi_battery_get_id(const char *battery_name)
+{
+
+ if (strcmp(battery_name, "BAT0") == 0)
+ return BAT_PRIMARY;
+ if (strcmp(battery_name, "BAT1") == 0)
+ return BAT_SECONDARY;
+
+ /*
+ * If for some reason the battery is not BAT0 nor is it
+ * BAT1, we will assume it's the default, first battery,
+ * AKA primary.
+ */
+ pr_warn("unknown battery %s, assuming primary", battery_name);
+ return BAT_PRIMARY;
+}
+
+/* sysfs interface */
+
+static ssize_t tpacpi_battery_store(int what,
+ struct device *dev,
+ const char *buf, size_t count)
+{
+ struct power_supply *supply = to_power_supply(dev);
+ unsigned long value;
+ int battery, errno;
+
+ /*
+ * Some systems have support for more than
+ * one battery. If that is the case,
+ * tpacpi_battery_probe marked that addressing
+ * them individually is supported, so we do that
+ * based on the device struct.
+ *
+ * On systems that are not supported, we assume
+ * the primary as most of the ACPI calls fail
+ * with "Any Battery" as the parameter.
+ */
+ if (battery_info.individual_addressing)
+ /* BAT_PRIMARY or BAT_SECONDARY */
+ battery = tpacpi_battery_get_id(supply->desc->name);
+ else
+ battery = BAT_PRIMARY;
+
+ errno = kstrtoul(buf, 10, &value);
+
+ if (errno)
+ return errno;
+
+ switch (what) {
+
+ case THRESHOLD_START:
+
+ if (!battery_info.batteries[battery].start_support)
+ return -ENODEV;
+
+ /* valid values are [0, 99] */
+ if (value < 0 || value > 99)
+ return -EINVAL;
+
+ if (value > battery_info.batteries[battery].charge_stop)
+ return -EINVAL;
+
+ if (tpacpi_battery_set(THRESHOLD_START, battery, value))
+ return -ENODEV;
+
+ battery_info.batteries[battery].charge_start = value;
+ return count;
+
+ case THRESHOLD_STOP:
+
+ if (!battery_info.batteries[battery].stop_support)
+ return -ENODEV;
+
+ /* valid values are [1, 100] */
+ if (value < 1 || value > 100)
+ return -EINVAL;
+
+
+ if (value < battery_info.batteries[battery].charge_start)
+ return -EINVAL;
+
+ battery_info.batteries[battery].charge_stop = value;
+
+ /*
+ * When 100 is passed to stop, we need to flip
+ * it to 0 as that the EC understands that as
+ * "Default", which will charge to 100%
+ */
+ if (value == 100)
+ value = 0;
+
+ if (tpacpi_battery_set(THRESHOLD_STOP, battery, value))
+ return -EINVAL;
+
+ return count;
+
+ default:
+ pr_crit("Wrong parameter: %d", what);
+ return -EINVAL;
+ }
+
+ return count;
+}
+
+static ssize_t tpacpi_battery_show(int what,
+ struct device *dev,
+ char *buf)
+{
+ struct power_supply *supply = to_power_supply(dev);
+ int ret, battery;
+
+ /*
+ * Some systems have support for more than
+ * one battery. If that is the case,
+ * tpacpi_battery_probe marked that addressing
+ * them individually is supported, so we;
+ * based on the device struct.
+ *
+ * On systems that are not supported, we assume
+ * the primary as most of the ACPI calls fail
+ * with "Any Battery" as the parameter.
+ */
+ if (battery_info.individual_addressing)
+ /* BAT_PRIMARY or BAT_SECONDARY */
+ battery = tpacpi_battery_get_id(supply->desc->name);
+ else
+ battery = BAT_PRIMARY;
+
+ if (tpacpi_battery_get(what, battery, &ret))
+ return -ENODEV;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t charge_start_threshold_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return tpacpi_battery_show(THRESHOLD_START, device, buf);
+}
+
+static ssize_t charge_stop_threshold_show(struct device *device,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return tpacpi_battery_show(THRESHOLD_STOP, device, buf);
+}
+
+static ssize_t charge_start_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return tpacpi_battery_store(THRESHOLD_START, dev, buf, count);
+}
+
+static ssize_t charge_stop_threshold_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return tpacpi_battery_store(THRESHOLD_STOP, dev, buf, count);
+}
+
+static DEVICE_ATTR_RW(charge_start_threshold);
+static DEVICE_ATTR_RW(charge_stop_threshold);
+
+static struct attribute *tpacpi_battery_attrs[] = {
+ &dev_attr_charge_start_threshold.attr,
+ &dev_attr_charge_stop_threshold.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(tpacpi_battery);
+
+/* ACPI battery hooking */
+
+static int tpacpi_battery_add(struct power_supply *battery)
+{
+ int batteryid = tpacpi_battery_get_id(battery->desc->name);
+
+ if (tpacpi_battery_probe(batteryid))
+ return -ENODEV;
+
+ if (device_add_groups(&battery->dev, tpacpi_battery_groups))
+ return -ENODEV;
+
+ return 0;
+}
+
+static int tpacpi_battery_remove(struct power_supply *battery)
+{
+ device_remove_groups(&battery->dev, tpacpi_battery_groups);
+ return 0;
+}
+
+static struct acpi_battery_hook battery_hook = {
+ .add_battery = tpacpi_battery_add,
+ .remove_battery = tpacpi_battery_remove,
+ .name = "ThinkPad Battery Extension",
+};
+
+/* Subdriver init/exit */
+
+static int __init tpacpi_battery_init(struct ibm_init_struct *ibm)
+{
+ battery_hook_register(&battery_hook);
+ return 0;
+}
+
+static void tpacpi_battery_exit(void)
+{
+ battery_hook_unregister(&battery_hook);
+}
+
+static struct ibm_struct battery_driver_data = {
+ .name = "battery",
+ .exit = tpacpi_battery_exit,
+};
+
/****************************************************************************
****************************************************************************
*
@@ -9647,6 +10081,10 @@ static struct ibm_init_struct ibms_init[] __initdata = {
.init = mute_led_init,
.data = &mute_led_driver_data,
},
+ {
+ .init = tpacpi_battery_init,
+ .data = &battery_driver_data,
+ },
};
static int __init set_ibm_param(const char *val, const struct kernel_param *kp)
--
2.7.4
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
