On Thu, Dec 21, 2017 at 12:00 PM, Ognjen Galic <smclt30p@xxxxxxxxx> wrote:
> thinkpad_acpi registers two new attributes for each battery:
>
> 1) Charge start threshold
> /sys/class/power_supply/BATN/charge_start_threshold
>
> Valid values are [0, 99]. A value of 0 turns off the
> start threshold wear control.
>
> 2) Charge stop threshold
> /sys/class/power_supply/BATN/charge_stop_threshold
>
> Valid values are [1, 100]. A value of 100 turns off
> the stop threshold wear control. This must be
> configured first.
>
> This patch depends on the following patches:
>
> "battery: Add the battery hooking API"
Sorry, didn't notice earlier some things commented below.
> #include <acpi/video.h>
>
> +
> /* ThinkPad CMOS commands */
Redundant change.
> +enum {
> + /* Error condition bit */
> + METHOD_ERR = (1 << 31),
bitops.h but no BIT() use?
BIT(31) ?
> +};
> +static int tpacpi_battery_set(int what, int battery, int value)
> +{
> +
Redundant.
> + int param = 0x0, ret = 0xFFFFFFFF;
Useless assignment for param, not sure abour ret.
> +
> + /* The first 8 bits are the value of the threshold */
> + param = value;
> + /* The battery ID is in bits 8-9, 2 bits */
> + param |= battery << 8;
> +
> + switch (what) {
> +
> + case THRESHOLD_START:
> +
> + if (tpacpi_battery_acpi_eval(SET_START, &ret, param)) {
> + pr_err("failed to set charge threshold on battery %d",
> + battery);
> + return -ENODEV;
> + }
> +
> + return 0;
> +
> + case THRESHOLD_STOP:
> +
> + if (tpacpi_battery_acpi_eval(SET_STOP, &ret, param)) {
> + pr_err("failed to set charge stop threshold: %d", battery);
> + return -ENODEV;
> + }
> +
> + return 0;
> +
> + default:
> + pr_crit("wrong parameter: %d", what);
> + return -EINVAL;
> + }
> +
Redundant.
> +}
> +
> +static int tpacpi_battery_probe(int battery)
> +{
> + int ret = 0;
> +
> + /* Reset the struct */
Useless.
> + memset(&battery_info, 0, sizeof(struct tpacpi_battery_driver_data));
> +}
> +static ssize_t tpacpi_battery_store(struct device *dev,
> + struct device_attribute *devattr,
> + const char *buf, size_t count)
> +{
> + int attr, battery;
> + unsigned long value;
> + struct power_supply *supply = to_power_supply(dev);
Can you use reverse xmas tree, esp. put assignments first.
> + if (!supply) {
How this could be possible?!
> + pr_err("Can't upcast to power_supply!");
> + return -ENODEV;
> + }
> + if (kstrtoul(buf, 10, &value))
> + return -EINVAL;
Don't shadow an error code from kstrtoul().
> +static ssize_t tpacpi_battery_show(struct device *dev,
> + struct device_attribute *devattr,
> + char *buf)
> +{
> + int ret = 0x0, attr, battery;
> + struct power_supply *supply = to_power_supply(dev);
> + if (!supply) {
How this could be possible?!
> + pr_crit("Can't upcast to power_supply!");
> + return -ENODEV;
> + }
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +DEVICE_ATTR(charge_start_threshold, 0644,
> + tpacpi_battery_show, tpacpi_battery_store);
> +DEVICE_ATTR(charge_stop_threshold, 0644,
> + tpacpi_battery_show, tpacpi_battery_store);
DEVICE_ATTR_RW().
> --- a/include/linux/power_supply.h
> +++ b/include/linux/power_supply.h
> @@ -371,6 +371,8 @@ devm_power_supply_register_no_ws(struct device *parent,
> extern void power_supply_unregister(struct power_supply *psy);
> extern int power_supply_powers(struct power_supply *psy, struct device *dev);
>
> +#define to_power_supply(device) container_of(device, struct power_supply, dev)
> +
> extern void *power_supply_get_drvdata(struct power_supply *psy);
> /* For APM emulation, think legacy userspace. */
> extern struct class *power_supply_class;
This one sounds to me as a separate change.
At the same time you may convert the current user of it to make sense
of the change.
drivers/power/supply/power_supply_core.c:671:
I think I pointed to this out once.
--
With Best Regards,
Andy Shevchenko
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
ibm-acpi-devel mailing list
ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
