Hi, I tried 2.6.28-rc3 (git a75952b) on my ThinkPad X61s, and now the fan runs at full speed after resume from suspend: $ cat /proc/acpi/ibm/fan status: enabled speed: 0 level: auto commands: level <level> (<level> is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog <timeout> (<timeout> is 0 (off), 1-120 (seconds)) $ echo mem > /sys/power/state After resume: $ cat /proc/acpi/ibm/fan status: enabled speed: 4796 level: 7 commands: level <level> (<level> is 0-7, auto, disengaged, full-speed) commands: enable, disable commands: watchdog <timeout> (<timeout> is 0 (off), 1-120 (seconds)) Setting it back again to "auto" works. After the next suspend cycle, it is back to level 7. This doesn't happen with 2.6.27. Regards, Tino ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ ibm-acpi-devel mailing list ibm-acpi-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/ibm-acpi-devel
