On Mon, Jul 25, 2022 at 05:43:10PM +0200, Harald Dunkel wrote: > Hi folks, > > setup: > kernel 5.18.14 (built from git) > Qnap TS-559 Pro II, 4*3.5 HDD + 1 SSD, /boot is on USB stick > Intel(R) Atom(TM) CPU D525 > Debian Sid > > On a reboot after some runtime my Qnap TS-559 Pro II shuts down cleanly, but > after the kernel and initrd are loaded again it writes an endless stream of > messages to the console > > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > pcieport 0000:00:1c:0: pciehp: Slot(0): Card present > pcieport 0000:00:1c:0: pciehp: Slot(0): No link > > Appr. 2 lines per second. I get an emergency console to login, but it > is garbled. > > If I wait a few minutes to let the qnap cool down it boots again. Try posting on the linux-pci@xxxxxxxxxxxxxxx list, that is the best for this type of thing. thanks, greg k-h
