On Mon, Aug 08, 2016 at 05:32:42PM -0700, divakar wrote: > Hi Greg, > > Thanks for your comments. I managed to install a client which will do > the auto format. Hopefully this is better than before. Please find my > responses inline. Also added extra questions and information about the > setup. > > Questions: > 1. Since the modified_my_driver_probe is working, is that the recommended > way of doing it? I couldn't find any sample drivers using it. So wanted > your guidance I dont understand, what "modified" probe function? > 2. There is no hotplug controller as far is know off in the setup ( > assuming native x86 soc has root port which has inbuilt hp controller > and pcieport driver takes care of it). Am i missing something? Then your hardware does not support PCI hotplug, so I don't recommend trying to use it. Seriously, this is a hardware and BIOS requirement to support this, if you don't have that hardware, you can't really work around it in the kernel. Go buy some real hardware for this please. > 3. When card 2 is inserted there is no hotplug event. Not sure why. Why would there be? You don't have hardware that notices this. good luck, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
