Am Freitag, 12. März 2010 15:25:29 schrieben Sie: > On Fri, Mar 12, 2010 at 12:55:35PM +0100, Winfried Hoena wrote: > > Hallo, > > > > my problem: any USB-sticks are unusable because they are not mounted and > > in /var/log/messages are found many read-errors from that sticks. > > What means the following in the output from lsusb -v: > > > > "can't get device qualifier: Numerical result out of range" > > Odd. Can you provide the full kernel log for when you plug the device > in? Do the following as root from a console: > dmesg -c # this clears out the log > plug the device in > dmesg > my_log > > then email us the my_log file. > > thanks, > > greg k-h > Hi, my usb-stick doesn't work not yet! The kernel is 2.6.31.12-0.2-default x86_64 from openSUSE and I think there is a problem with the usb-subsystem. A linux livesystem works properly with this usb-stick on the same computer, so I think the hardware is ok. Please help me to prevent lost of data. Thank You Winfried Höna
[21456.200069] # [21471.188038] usb 1-7: new high speed USB device using ehci_hcd and address 17 [21471.322791] usb 1-7: New USB device found, idVendor=13fe, idProduct=1d00 [21471.322819] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21471.322833] usb 1-7: Product: Flash Disk [21471.322843] usb 1-7: Manufacturer: USB [21471.322853] usb 1-7: SerialNumber: 90711C0025DF [21471.323055] usb 1-7: configuration #1 chosen from 1 choice [21471.326949] scsi11 : SCSI emulation for USB Mass Storage devices [21471.328329] usb-storage: device found at 17 [21471.328335] usb-storage: waiting for device to settle before scanning [21472.328915] scsi 11:0:0:0: Direct-Access USB Flash Disk V1.1 PQ: 0 ANSI: 0 CCS [21472.329349] sd 11:0:0:0: Attached scsi generic sg6 type 0 [21472.781000] usb-storage: device scan complete [21472.781624] sd 11:0:0:0: [sdd] 2015232 512-byte logical blocks: (1.03 GB/984 MiB) [21472.782117] sd 11:0:0:0: [sdd] Write Protect is off [21472.782133] sd 11:0:0:0: [sdd] Mode Sense: 23 00 00 00 [21472.782138] sd 11:0:0:0: [sdd] Assuming drive cache: write through [21472.960031] usb 1-7: reset high speed USB device using ehci_hcd and address 17 [21473.102599] usb 1-7: device firmware changed [21473.103040] sd 11:0:0:0: [sdd] READ CAPACITY failed [21473.103055] sd 11:0:0:0: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [21473.103070] sd 11:0:0:0: [sdd] Sense not available. [21473.103158] sd 11:0:0:0: [sdd] Assuming drive cache: write through [21473.103175] sdd: detected capacity change from 1031798784 to 0 [21473.103728] sd 11:0:0:0: [sdd] READ CAPACITY failed [21473.103744] sd 11:0:0:0: [sdd] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [21473.103759] sd 11:0:0:0: [sdd] Sense not available. [21473.103844] sd 11:0:0:0: [sdd] Assuming drive cache: write through [21473.103859] sd 11:0:0:0: [sdd] Attached SCSI removable disk [21473.103886] usb 1-7: USB disconnect, address 17 [21473.216059] usb 1-7: new high speed USB device using ehci_hcd and address 18 [21473.350843] usb 1-7: New USB device found, idVendor=13fe, idProduct=1d00 [21473.350868] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [21473.350882] usb 1-7: Product: Flash Disk [21473.350892] usb 1-7: Manufacturer: USB [21473.350902] usb 1-7: SerialNumber: 90711C0025DF [21473.351091] usb 1-7: configuration #1 chosen from 1 choice [21473.351496] scsi12 : SCSI emulation for USB Mass Storage devices [21473.351785] usb-storage: device found at 18 [21473.351789] usb-storage: waiting for device to settle before scanning [21474.348828] scsi 12:0:0:0: Direct-Access USB Flash Disk V1.1 PQ: 0 ANSI: 0 CCS [21474.349058] sd 12:0:0:0: Attached scsi generic sg6 type 0 [21474.349458] usb-storage: device scan complete [21474.364391] sd 12:0:0:0: [sdd] 2015232 512-byte logical blocks: (1.03 GB/984 MiB) [21474.364938] sd 12:0:0:0: [sdd] Write Protect is off [21474.364953] sd 12:0:0:0: [sdd] Mode Sense: 23 00 00 00 [21474.364957] sd 12:0:0:0: [sdd] Assuming drive cache: write through [21474.367690] sd 12:0:0:0: [sdd] Assuming drive cache: write through [21474.367710] sdd: sdd1 [21474.372449] sd 12:0:0:0: [sdd] Assuming drive cache: write through [21474.372477] sd 12:0:0:0: [sdd] Attached SCSI removable disk [21480.340091] # [21504.928057] usb 1-7: reset high speed USB device using ehci_hcd and address 18 [21547.928047] usb 1-7: reset high speed USB device using ehci_hcd and address 18 [21578.928041] usb 1-7: reset high speed USB device using ehci_hcd and address 18 [21579.808104] # [21609.928035] usb 1-7: reset high speed USB device using ehci_hcd and address 18 [21610.155428] usb 1-7: device firmware changed [21610.155500] sd 12:0:0:0: Device offlined - not ready after error recovery [21610.155531] sd 12:0:0:0: [sdd] Unhandled error code [21610.155543] sd 12:0:0:0: [sdd] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK [21610.155558] end_request: I/O error, dev sdd, sector 199 [21610.155593] sd 12:0:0:0: rejecting I/O to offline device [21610.155626] sd 12:0:0:0: rejecting I/O to offline device [21610.155644] sd 12:0:0:0: rejecting I/O to offline device ... [21610.156901] sd 12:0:0:0: [sdd] Unhandled error code [21610.156913] sd 12:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [21610.156928] end_request: I/O error, dev sdd, sector 200 [21610.157259] usb 1-7: USB disconnect, address 18 [21610.164526] FAT: FAT read failed (blocknr 167) [21610.167070] FAT: FAT read failed (blocknr 2) [21610.170381] FAT: FAT read failed (blocknr 2) [21610.173980] FAT: FAT read failed (blocknr 2)
