udev rule for usb drive

[Mike Mildner <mike.mildner@xxxxxxxxxx>]

hi all,

i know its cold coffee for you but i ask you again:

i can't write a rule for my usb disk. the debug modus don't help. so i hope you can help me.

root@host:#udevinfo -a -p $(udevinfo -q path -n /dev/sdc)

looking at device '/block/sdc':
    KERNEL=="sdc"
    SUBSYSTEM=="block"
    DRIVER==""
    ATTR{stat}=="   21360   267403   289160    85764        0        0        0        0        0    52076    85756"
    ATTR{size}=="976773168"
    ATTR{removable}=="0"
    ATTR{range}=="16"
    ATTR{dev}=="8:32"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host4/target4:0:0/4:0:0:0':
    KERNELS=="4:0:0:0"
    SUBSYSTEMS=="scsi"
    DRIVERS=="sd"
    ATTRS{ioerr_cnt}=="0x0"
    ATTRS{iodone_cnt}=="0x5377"
    ATTRS{iorequest_cnt}=="0x5377"
    ATTRS{iocounterbits}=="32"
    ATTRS{timeout}=="30"
    ATTRS{state}=="running"
    ATTRS{rev}=="    "
    ATTRS{model}=="HD501LJ         "
    ATTRS{vendor}=="SAMSUNG "
    ATTRS{scsi_level}=="3"
    ATTRS{type}=="0"
    ATTRS{queue_type}=="none"
    ATTRS{queue_depth}=="1"
    ATTRS{device_blocked}=="0"
    ATTRS{max_sectors}=="240"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host4/target4:0:0':
    KERNELS=="target4:0:0"
    SUBSYSTEMS==""
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0/host4':
    KERNELS=="host4"
    SUBSYSTEMS==""
    DRIVERS==""

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3/3-1/3-1:1.0':
    KERNELS=="3-1:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb-storage"
    ATTRS{interface}=="Bulk Only Interface"
    ATTRS{modalias}=="usb:v04FCp0C25d0103dc00dsc00dp00ic08isc06ip50"
    ATTRS{bInterfaceProtocol}=="50"
    ATTRS{bInterfaceSubClass}=="06"
    ATTRS{bInterfaceClass}=="08"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bInterfaceNumber}=="00"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3/3-1':
    KERNELS=="3-1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}=="Bulk Only Configuration"
    ATTRS{serial}=="SAMSUNG HDS0MUJ1NQA49906      "
    ATTRS{product}=="USB to Serial-ATA bridge"
    ATTRS{manufacturer}=="Sunplus Technology Inc."
    ATTRS{maxchild}=="0"
    ATTRS{version}==" 2.00"
    ATTRS{devnum}=="2"
    ATTRS{speed}=="480"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bcdDevice}=="0103"
    ATTRS{idProduct}=="0c25"
    ATTRS{idVendor}=="04fc"
    ATTRS{bMaxPower}=="  2mA"
    ATTRS{bmAttributes}=="c0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bNumInterfaces}==" 1"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7/usb3':
    KERNELS=="usb3"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{serial}=="0000:00:1d.7"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{manufacturer}=="Linux 2.6.18-6-686 ehci_hcd"
    ATTRS{maxchild}=="4"
    ATTRS{version}==" 2.00"
    ATTRS{devnum}=="1"
    ATTRS{speed}=="480"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bDeviceProtocol}=="01"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bcdDevice}=="0206"
    ATTRS{idProduct}=="0000"
    ATTRS{idVendor}=="0000"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bNumInterfaces}==" 1"

  looking at parent device '/devices/pci0000:00/0000:00:1d.7':
    KERNELS=="0000:00:1d.7"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{broken_parity_status}=="0"
    ATTRS{enable}=="1"
    ATTRS{modalias}=="pci:v00008086d000025ADsv000015D9sd00005180bc0Csc03i20"
    ATTRS{local_cpus}=="ff"
    ATTRS{irq}=="209"
    ATTRS{class}=="0x0c0320"
    ATTRS{subsystem_device}=="0x5180"
    ATTRS{subsystem_vendor}=="0x15d9"
    ATTRS{device}=="0x25ad"
    ATTRS{vendor}=="0x8086"

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

thats the device and i try some houres around this rule:

SUBSYSTEMS=="usb", KERNEL=="sd??", ATTRS{serial}=="SAMSUNG HDS0MUJ1NQA49906      ", SYMLINK+="usbplatte%n"

what is the trick? after every change on this rule i used 'udevcontrol reload_rules' but /dev dosen't show the device 'usbplatte'?

please give me a hint.
thanks a lot!
--
To unsubscribe from this list: send the line "unsubscribe linux-hotplug" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html