[PATCH] Include EHT Operation Information field only if 320MHz and/or if at least one punctured 20MHz subchannel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



802.11be D3 chapter 35.15.1 Basic EHT BSS operation defines:
EHT AP shall include EHT Operation Information field only if at least one punctured 20MHz subchannel
and/or is 320MHz. Otherwise, the EHT AP shall set the EHT Operation Information Present subfield to 0.

Signed-off-by: Jurijs Soloveckis <jsoloveckis@xxxxxxxxxxxxx>
---
 src/ap/ieee802_11_eht.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/src/ap/ieee802_11_eht.c b/src/ap/ieee802_11_eht.c
index 1d1751837..27df569a1 100644
--- a/src/ap/ieee802_11_eht.c
+++ b/src/ap/ieee802_11_eht.c
@@ -199,11 +199,23 @@ u8 * hostapd_eid_eht_operation(struct hostapd_data *hapd, u8 *eid)
 	struct ieee80211_eht_operation *oper;
 	u8 *pos = eid, seg0 = 0, seg1 = 0;
 	enum oper_chan_width chwidth;
-	size_t elen = 1 + 4 + 3;
+	size_t elen = 1 + 4;
+	bool eht_oper_info_present = false;
 
 	if (!hapd->iface->current_mode)
 		return eid;
 
+	if (is_6ghz_op_class(conf->op_class))
+		chwidth = op_class_to_ch_width(conf->op_class);
+	else
+		chwidth = conf->eht_oper_chwidth;
+
+	eht_oper_info_present = (chwidth == CONF_OPER_CHWIDTH_320MHZ) ||
+		    hapd->iconf->punct_bitmap;
+
+	if (eht_oper_info_present)
+		elen += 3;
+
 	if (hapd->iconf->punct_bitmap)
 		elen += EHT_OPER_DISABLED_SUBCHAN_BITMAP_SIZE;
 
@@ -212,7 +224,6 @@ u8 * hostapd_eid_eht_operation(struct hostapd_data *hapd, u8 *eid)
 	*pos++ = WLAN_EID_EXT_EHT_OPERATION;
 
 	oper = (struct ieee80211_eht_operation *) pos;
-	oper->oper_params = EHT_OPER_INFO_PRESENT;
 
 	/* TODO: Fill in appropriate EHT-MCS max Nss information */
 	oper->basic_eht_mcs_nss_set[0] = 0x11;
@@ -220,11 +231,10 @@ u8 * hostapd_eid_eht_operation(struct hostapd_data *hapd, u8 *eid)
 	oper->basic_eht_mcs_nss_set[2] = 0x00;
 	oper->basic_eht_mcs_nss_set[3] = 0x00;
 
-	if (is_6ghz_op_class(conf->op_class))
-		chwidth = op_class_to_ch_width(conf->op_class);
-	else
-		chwidth = conf->eht_oper_chwidth;
+	if (!eht_oper_info_present)
+		return pos + elen;
 
+	oper->oper_params = EHT_OPER_INFO_PRESENT;
 	seg0 = hostapd_get_oper_centr_freq_seg0_idx(conf);
 
 	switch (chwidth) {
-- 
2.17.1


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux