Re: [PATCH] DSSS Parameter Set element is added for 2.4GHz only

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 01, 2023 at 11:11:03AM +0000, Jurijs Soloveckis wrote:
> From IEEE802.11:
> The DSSS Parameter Set element is present within Beacon frames
> generated by STAs using Clause 15, Clause 16, and Clause 18
> PHYs.
> The element is present within Beacon frames generated by STAs
> using a Clause 19 PHY in the 2.4 GHz band.
> 
> Same is applied to the Probe Response frame.

Thanks, applied with somewhat modified design. Please note that this
email was whitespace damaged so it did not apply and I had to do the
edits manually.

-- 
Jouni Malinen                                            PGP id EFC895FA

_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux