From: krishna T <krishna.t@xxxxxxxxxxxxx>
Before the control interface changes we had added a new command to set
the H2E in the WPA supplicant configuration, but this was removed, so,
add back the command that can be set through WPA cli.
Signed-off-by: Krishna T <krishna.t@xxxxxxxxxxxxx>
---
v2: Check and assign.
---
wpa_supplicant/ctrl_iface.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/wpa_supplicant/ctrl_iface.c b/wpa_supplicant/ctrl_iface.c
index 9abfeb216..27a4ec7d6 100644
--- a/wpa_supplicant/ctrl_iface.c
+++ b/wpa_supplicant/ctrl_iface.c
@@ -934,6 +934,17 @@ static int wpa_supplicant_ctrl_iface_set(struct wpa_supplicant *wpa_s,
#endif /* CONFIG_WNM */
} else if (os_strcasecmp(cmd, "enable_dscp_policy_capa") == 0) {
wpa_s->enable_dscp_policy_capa = !!atoi(value);
+#ifdef CONFIG_SAE
+ } else if (os_strcasecmp(cmd, "sae_pwe") == 0) {
+ int pwe = atoi(value);
+
+ if (pwe < 0 || pwe > 2) {
+ wpa_printf(MSG_ERROR,
+ "Invalid SAE PWE value %d", pwe);
+ return -1;
+ }
+ wpa_s->conf->sae_pwe = pwe;
+#endif /* CONFIG_SAE */
} else {
value[-1] = '=';
ret = wpa_config_process_global(wpa_s->conf, cmd, -1);
--
2.34.1
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
