Hi, I'm using a Qualcomm Atheros QCA6174 with wpa_supplicant v2.10. When I start a hotspot with the commands below, it can be joined by most devices (Linux, Windows, iOS) but not an M1 MacBook Pro. I've determined that this is because of SAE/WPA3 support: if I run macOS's `airport` CLI utility, I see that the wpa_supplicant 2.10 hotspot offers `WPA(PSK/AES/AES) RSN(PSK,PSK-SHA256,SAE/AES/AES)` in the Security column. When I use wpa_supplicant 2.9, it offers `WPA(PSK/AES/AES) RSN(PSK,PSK-SHA256/AES/AES)`, and the MacBook can join. Is there a way to disable SAE and force the use of WPA2-PSK with AES on wpa_supplicant 2.10? (Whether through nmcli or wpa_cli or something else?) Sample hotspot commands: nmcli con add type wifi ifname wlp2s0 con-name test_ssid autoconnect yes ssid test_ssid nmcli con modify test_ssid 802-11-wireless.mode ap ipv4.method shared nmcli con modify test_ssid wifi-sec.key-mgmt wpa-psk nmcli con modify test_ssid wifi-sec.pairwise ccmp nmcli con modify test_ssid wifi-sec.group ccmp nmcli con modify test_ssid wifi-sec.psk testpassword nmcli con up test_ssid Unimportant side notes: specifying `wifi-sec.proto rsn` works on 2.9 but prevents any devices from joining on 2.10. And if I try to just opt into WPA3 with `wifi-sec.key-mgmt sae` on 2.10, standing up the network times out with error "802.1X supplicant took too long to authenticate". I'm not sure if that's because my card is too old but `iw list` includes "Device supports SAE with AUTHENTICATE command". Thanks, Theron _______________________________________________ Hostap mailing list Hostap@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/hostap
