Re: Cannot lookup EAP user on reauthentication (PEAP/TTLS)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On May 27, 2022, at 9:09 PM, James Prestwood <prestwoj@xxxxxxxxx> wrote:
> I believe its looking it up directly from the reauth command:

  OK, so that's the piece which was missing.

  The reauth command could just re-authenticate a particular port.  In which case (IIRC) t only needs to know the MAC which was authenticated.

> And you're right, I'm not sure why it needs to look up the identity at
> this point. It could just send an identity request to the station, wait
> for whatever identity is sent back, and use that for the lookup. This
> would put the burden on the station to send the correct identity. But
> in any case, this is what it does.

  That seems correct.  If the supplicant sends the same identity, the previously cached one will be found.  If the supplicant sends a different identity, then they have to do a full re-authentication.

  Alan DeKok.


_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap



[Index of Archives]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux