When using 40/80/160MHz over 5G/6G, enforce the secondary channel to be
the other channel of the corresponding 40MHz segment.
Even if this is useless for now, this is preparatory work to allow
ACS to select a primary channel which is not the first of it's segment.
Signed-off-by: Nicolas Escande <nico.escande@xxxxxxxxx>
---
src/ap/acs.c | 43 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/src/ap/acs.c b/src/ap/acs.c
index a6cdfb962..176b22e67 100644
--- a/src/ap/acs.c
+++ b/src/ap/acs.c
@@ -631,6 +631,24 @@ acs_find_chan_mode(struct hostapd_hw_modes *mode, int freq)
return NULL;
}
+static enum hostapd_hw_mode
+acs_find_mode(struct hostapd_iface *iface, int freq)
+{
+ int i;
+ struct hostapd_hw_modes *mode;
+ struct hostapd_channel_data *chan;
+
+ for (i = 0; i < iface->num_hw_features; i++) {
+ mode = &iface->hw_features[i];
+ if (!hostapd_hw_skip_mode(iface, mode)) {
+ chan = acs_find_chan_mode(mode, freq);
+ if (chan)
+ return mode->mode;
+ }
+ }
+
+ return HOSTAPD_MODE_IEEE80211ANY;
+}
static struct hostapd_channel_data *
acs_find_chan(struct hostapd_iface *iface, int freq)
@@ -942,6 +960,27 @@ bw_selected:
}
+static void acs_adjust_secondary(struct hostapd_iface *iface)
+{
+ unsigned int i;
+
+ /* When working with bw > 20 on 5G/6G, ACS can return a secondary wich
+ * is not channel the first of the segment & wee need to abjust */
+ if (!iface->conf->secondary_channel ||
+ acs_find_mode(iface, iface->freq) != HOSTAPD_MODE_IEEE80211A)
+ return;
+
+ wpa_printf(MSG_DEBUG, "ACS: Adjusting HT/VHT/HE secondary frequency");
+
+ for (i = 0; bw_desc[ACS_BW40].first != -1; i++) {
+ if (iface->freq == bw_desc[ACS_BW40][i].first)
+ iface->conf->secondary_channel = 1;
+ else if (iface->freq == bw_desc[ACS_BW40][i].last)
+ iface->conf->secondary_channel = -1;
+ }
+}
+
+
static void acs_adjust_center_freq(struct hostapd_iface *iface)
{
int center;
@@ -1024,8 +1063,10 @@ static void acs_study(struct hostapd_iface *iface)
iface->conf->channel = ideal_chan->chan;
iface->freq = ideal_chan->freq;
- if (iface->conf->ieee80211ac || iface->conf->ieee80211ax)
+ if (iface->conf->ieee80211ac || iface->conf->ieee80211ax) {
+ acs_adjust_secondary(iface);
acs_adjust_center_freq(iface);
+ }
err = 0;
fail:
--
2.36.0
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
