2022年1月19日(水) 19:13 Michael Biebl <biebl@xxxxxxxxxx>:
> I tried the various versions from snapshots.d.o
>
> 2:2.9.0-23 - works
> 2:2.9.0+git20200221+f65da0c-1 - works
> 2:2.9.0+git20200517+dd2daf0-1 - doesn't work
> 2:2.9.0+git20210909+a75fdcd-1 - doesn't work
> 2:2.9.0+git20211018+2e122945fa53-1 - doesn't work
> 2:2.9.0+git20211116+0b853303ae31-1 - doesn't work
> 2:2.10-1 - doesn't work
>
>
> I then went on and disabled WPA2+WPA3 mode on the Wi-Fi router and set
> it to WPA2 (CCMP).
>
> After that, the connection was established successfully with 2.10.
>
> If I remember correctly, my hardware doesn't support WPA3, but since I
> enabled support for both WPA2+WPA3, it should fall back to WPA2.
>
> Obviously I'd like to keep WPA3 enabled for newer clients.
>
> Regards,
> Michael
Could you try this patch to latest wpa_supplicant ?
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index d37a994f9..626e26e4f 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -7976,17 +7976,10 @@ int wpas_network_disabled(struct
wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
int wpas_get_ssid_pmf(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
{
- if (ssid == NULL || ssid->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT) {
- if (wpa_s->conf->pmf == MGMT_FRAME_PROTECTION_OPTIONAL &&
- !(wpa_s->drv_enc & WPA_DRIVER_CAPA_ENC_BIP)) {
- /*
- * Driver does not support BIP -- ignore pmf=1 default
- * since the connection with PMF would fail and the
- * configuration does not require PMF to be enabled.
- */
- return NO_MGMT_FRAME_PROTECTION;
- }
+ if (!(wpa_s->drv_enc & WPA_DRIVER_CAPA_ENC_BIP))
+ return NO_MGMT_FRAME_PROTECTION;
+ if (ssid == NULL || ssid->ieee80211w == MGMT_FRAME_PROTECTION_DEFAULT) {
if (ssid &&
(ssid->key_mgmt &
~(WPA_KEY_MGMT_NONE | WPA_KEY_MGMT_WPS |
Regards,
Masashi Honma.
_______________________________________________
Hostap mailing list
Hostap@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/hostap
